Programmable Constant Temperature and Humidity Test Chamber
It is critical for manufacturers to locate product flaws before their product reaches the market.
1. Brand new design and competitive price.
2. 1 year free parts warranty.
3. Pogrammable digital LCD controller.
By testing your product with KOMEG Brand Constant Temperature and Humidity Test Chamber you can:
Shorten Product Development PeriodIncrease Customers' Confidence and LoyaltyEnsure Product Quality & ReliabilityForecast Life ExpectancyReduce Costs of DevelopmentIncrease Profitability and Brand Value for both users and their clients.Reduce Frequency and Labor Cost of After Sales Service
Standard configuration
Sight window*1, cable port(portΦ50mm)*1, shelves*2, chamber lamp*1, power cable *2m
No fuse breaker, over pressure,over heat and over current protection for compressor,
Over temperature protection, over load protect of blower, dry heat protection
Optional accessories
Cable Port: Φ100mm cable port is available
Shelves
Ro-type water purifier:R-80/day
Provide to keep the humidifying heater and wet bulb wick free from scale.
Inner glass door with operation port
A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door.
Dehumidifier
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (5ºC 5%RH) for electrostatic reliability tests.
Temperature and humidity recorder
-100 to +150ºC/0 to 100%RH 100mm with effective width 100mm and 2 pen
Temperature 1 pen and humidity 1 pen.
-100 to +150ºC/0 to 100%RH 100mm with effective width 100mm and 6 dots
Temperature 3 dots and humidity 1 dot.
-100 to +150ºC/0 to 100%RH 100mm with effective width 180mm and 12 dots
Temperature 6 dots and humidity 6 dots.
Defrosting circuit
The chamber automatically detects and melts the frost on the evaporator when operating below 0ºC.
Liquid or infection
In order to rapidly decrease the temperature inside the chamber, a cylinder of liquid can be connected the chamber.
New design, high temperature uniformity
Detailed parts:
CE Certification
Installation environment
Distance from the wall to both sides and rear of chamber more than 800mm, to the front more than 1500mm. Provide independent power distribution switchgear and humidification condensate drains, and external power connector device is necessary
Ground level, well-ventilated , non- flammable, explosive, corrosive gases and dust
No strong electromagnetic radiation nearby
With floor drain ( less than 2 meters from the refrigeration unit )
Venue floor load capacity : not less than800kg/m2
Leave adequate space for maintenance
Your company has just developed a great new product,
and now it is your job to select an environmental test
chamber to test it and make sure it will hold up.
Komeg has business on reliability test equipment for more than 20years.
KOMEG is widely recognized and commended bu the top 500comopanies and also customers from electronic, computer, home appliance, communications, chemical industry and scientific reseach.
Our valued Customers
After-sale service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Packaging:packaged by strong plywood.
Welcome to KOMEG, Nancy is here for you 7*24 hours.
Please check the following technical parameter:
| Model |
KMH-408L |
| 408L chamber volume |
| Temp. range |
-40°C ~150°C |
| Display resolution |
0.1°C |
| Temperature stability |
High±0.5°C ,low ±1.0°C |
| Temperature uniformity |
±2.0°C |
| Heat up time |
-40°C ~+100°C,within 45 min |
| Pull down time |
+20°C ~-40°C,within 60 min |
| Humidity range |
20~98%R.H,(standard), '10~98%R.H,(with humidifier) |
| Humidity constancy |
±2.5%R.H |
| Humidity uniformity |
±3.0%R.H |
| Interior Dimension(mm) |
700W*750H*800D |
| Exterior Dimension(mm) |
980W*1940H*1740D |
| Interior material |
Stainless Steel Plate(SUS 304) |
| Exterior material |
Baked Painting Steel Or Stainless steel(SUS304) |
| Insulation material |
Rigid polyurethane Foam and Glass Fiber Wool |
| Total power |
7KW(heater 3KW included) |
| Max current |
17A |
| Water Consumption |
1L/hr |
| Ambient Temp. |
+5°C ~+35°C |
| Power Supply |
|
AC 380V±10%50Hz ,3 phase 4 wires +Ground Wires |
| Weight |
420KG |
| Sight window size |
460*560mm |
| Sample holder |
2 pcs |
| Fittings |
cable port(portΦ50mm)*1, chamber lamp*1, power cable *2m |
| Safety device (standard) |
No fuse breaker,over pressure,over heat&over current protect,over temp. protect, over load protect for blower, dry heat protect |
| Control System |
Balanced Temperature & Humidity Control (BTHC)System |
| Refrigeration system |
Air Cooled (Water Cooled is option) |
| Hermetic compressor |
| Hermetic compressor Single stage refrigeration system, CFC-Free refrigerant(HFC-507/HFC-23) |
| CFC-Free refrigerant(HFC-507/HFC-23) |
| Controller |
7-inch LCD Touch Screen panel |
| Operation model :Program or fix point running |
| Memory capacity :120programs,1200steps, |
| All repeat 999 cycles, part repeat 99 cycles |
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}