KOMEG Brand HL-60-SS Salt Spray Tester
Specifications
HL-60-SS Salt Spray Test Chamber
1. Manufacturer
2.2 year after sale
3. In stock
Application
Salt water spray test device: This device is used to test the surface treatment of various materials. The so-called treatments include coating, electroplating, films of organic and non-organic materials, anodizing, anti-rest oil and corrosion resistant treatment, which may achieve the purpose of keeping the items from being corroded for a longer period.
Character
1. The spray nozzle the heart of teser adopt Bo Nute Principle which change saline water into atomization but no crystallization produced.
2. The controller is digital type microcomputer which delivers precision temparature
3. Parameters show on the display screen such as temparature, humidity, pressure, spray capacity and time.
4. Test specifications are accept worldwild.
Features:
(A) The whole part of the device is made of P. V. C. Sheet and the inside of the device is reinforced by using a special lining material. Hence, it is sturdily made and will not transform forever.
(B) The test chamber is heated from five directions in order to ensure the temperature difference in
The chamber may be kept within (± 1º C).
(C) Spray nozzle: The nozzle is specially made to enable it to suck up the salt water and then spray it out in the shape of mist with considerable high speed. When it falls on the surface of the item
Being tested, the difference of fallen mist may be controlled within ± 0.3ml / 80 cm2h.
(D) HUNTER PRINCIPLE is used to make the saturated air hot and moist and to keep the humidity in the test chamber required for test.
(E) Temperature is the pre-requisite condition that with have direct impact on corrosion rate. We use P. I. D. Temperature control unit to limit the temperature difference within the range of ± 0.5º C.
(F) A warning device is used to indicate the low level of the test fluid, when the fluid is only enough for being sprayed for five hours, a buzzer will remind the user to replenish the liquid to ensure
Continuous spray test.
(G) Use full automatic detecting system, test stopped automatic, and lighting display when trouble.
(H) Customized sizes and configurations are available
Standards implemented and met
1 GB/T 2423.17-1993 salt spray test
2 GB/T 2423.18-2000 salt spray test
3 GB/T 10125-1997 salt spray test
4 ASTM. B117-97 salt spray test
5 JIS H8502 salt spray test
6 IEC68-2-11 salt spray test
7 IEC68-2-52 1996 salt spray test
8 GB. 10587-89 salt spray test
9 CNS. 4158 salt spray test
10 CNS. 4159 CASS Copper accelerated acid salt spray test
11 GB/T 12967.3-91 CASS Copper accelerated acid salt spray tester
| Specifications (Note: We reserve the right to change specifications without prior notice) |
| Model |
HL-160-NS |
HL-90-BS |
HL-60-SS |
| Interior dimensions(W*H*D)mm |
1600*500*1000 |
900*500*600 |
600*400*450 |
| Exterior dimensions(W*H*D)mm |
2240*1500*1600 |
1460*1280*910 |
1130*1070*630 |
| Volume(L) |
800 |
270 |
60 |
| Heater |
15KW+1KW |
7KW+0.75KW |
3KW+0.75KW |
| Air compressor |
2HP |
1/2HP |
1/2HP |
| Temp. range |
35 ºC~ 50 ºC |
| Power |
AC220V 1Φ 50Hz
|
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}