Komeg 64 Liter 2-Zone Environmental Thermal Shock Test Chamber

• After-sales Service: 24 Hours on Line Services
• Power Supply: 380V AC 50Hz
• Certification: CE, ISO
• Warranty: 1 Year
• Temp. Shock Range: -40ºC~+150ºC
• Volume: 64 Liters
• Model NO.: TST-64A
• Basket Size(W* H* D): 400*400*400mm
• Exterior Size(W* H* D): 860*2010*2200mm
• Cooling Method: Water Cooled
• High Temp. Chamber Temp. Range: +60ºC~+200ºC
• Low Temp. Chamber Temp. Range: -65ºC~0ºC
• Pre-Heating Time: Within 30 Min
• Pre-Cooling Time: Within 60 Min
• Temperature Uniformity: +/-2ºC
• Temp. Fluctuation: +/-0.5ºC
• Temp. Deviation: +/-2ºC
• Temp. Recovery Time: Within 5 Min
• Transport Package: Standard Exported Wooden Box
• Specification: Standard & Customized available
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 9032100000
• Production Capacity: 100 Sets /Month

Product Description

KOMEG 64 Liter 2-Zone Environmental Thermal Shock Test Chamber

Product Overview & Application

2 Zone Thermal Shock Test Chamber is an effective tool in subjecting products to a thermal shock test.It is used to detect the resistance ability of electronic, automobile, rubber, plastics, aerospace science and technology, advanced communication equipment and other products in the heat and cold condition, so as to judge the reliability and stability for the products, improve the products quality and provide the basis for the reliability.

Thermal Shock Environmental Chambers have a product carrier basket that automatically transports the specimen under test between separately controlled temperature zones(cold chamber to hot chamber). The basket slides vertically and smoothly through rails, to make the specimen is exposed to the two chambers.

Available in small capacity and large capacity to meet different testing requirements.

Standard Compliance

 

GB-2423.1-2008(IEC68-2-1)	Test A: Low Temperature Test
GB-2423.2-2008(IEC68-2-2)	Test B: High Temperature Test
GJBl50.3-2009(MIL-STD-810D)	High Temperature Test
GJBl50.4-2009(MIL-STD-810D)	Low Temperature Test
GJBl50.5-2009	Temperature shock test method

 

Product Parameters

 

Model	TST-64A (2-Zone/Basket Type)
Volume(L)	64L
Basket size(W* H*D)(mm)	400*400*400mm
Exterior size W*H*D(mm)	860*2010*2200mm
Test weight(KG)	3.5
High Temp.Chamber	+60ºC~+200ºC
Pre-heating time	from normal temperature RT ~ +200ºC, Within 30 min
Low Temp.Chamber	0ºC~ -40ºC
Pre-cooling time	from normal temperature RT ~ -70° C Within 60 min
Temp.Shock Range	-40ºC~+150ºC
Temperature uniformity	<=±2.0ºC
Temperature fluctuation	<=±0.5ºC
Temperature deviation	±2.0ºC
Transfer time	<=10s
Recovery time	<=5min
Noise	<=75dB
Interior material	Stainless steel plate(SUS 304)
Exterior material	Baked painting steel or stainless steel(SUS304)
Insulation material	Rigid polyurethane Foam + glass fiber wool
Refrigeration system	Water Cooled
	Semi-hermetic compressor, cascade refrigeration system,Eco-friendly refrigerant
Controller	Panel:7-inch LCD Touch screen, Chinese / English display for option
	Operation model: Program or fix point running
	Memory capacity:120programs,1200steps, all repeat 999cycles, part repeat 99 cycles.
	Accuracy:Temp.:0.1% of F.S±1 digit     Humidity:0.1% of F.S±1 digit
	Input:Temp.:pt-100                Humidity:pt-100 or ~5V DCV
Ambient Temp.	+5ºC~+35ºC
Safety device	NFB(No fuse breaker), over pressure, over heat and over current protection for compressor, over temperature protection,  over load protection for blower, dry heat protection
Standard accessory	Cable port(portΦ50mm)*1,   shelves*2
Power	AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires
Note: 1. We reserve the right to change specifications without prior notice   2. Customized sizes and configurations available

Detailed Photos

 

Our Process Flow

 

Company Profile

Our Service

Pre-sale Service:

Provide test solution
Send specification and quotation

In-sale Service:

Design
Production
Calibration
Installation
Training
Preventative maintenance

After-sale Service:

24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair

Packaging & Shipping

FAQ

Q:Are your company a trading one or a factory?

A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.

Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.

Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.

Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.

Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our 
production lead time depends on specific items and item quantities. 

Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.

Q:What about the  product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.

Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.