CE Certified 3- Zone Hot Cold Thermal Shock Cycle Chamber

• Customization: Available
• After-sales Service: 24 Hours on Line Services
• Power Supply: 380V AC 50Hz
• Model NO.: KTS Series
• Certification: CE, ISO
• Warranty: 12 Months
• Cooling Method: Water Cooling
• Temp. Shock Range: -65ºC~+150ºC
• Controller: 7-Inch LCD Touch Screen
• Compressor: Copeland or German Bitzer
• High Temp. Chamber Temp. Range: +60ºC~+200ºC
• Low Temp. Chamber Temp. Range: -65ºC~0ºC
• Pre-Heating Time: Within 30 Min
• Pre-Cooling Time: Within 60 Min
• Temperature Uniformity: +/-2ºC
• Temp. Deviation: +/-2ºC
• Temp. Fluctuation: +/-0.5ºC
• Temp. Recovery Time: Within 5 Min
• Transport Package: Standard Exported Fumigation Wooden Case
• Specification: Standard and Customized available
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 9032100000
• Production Capacity: 100 Sets /Month
• Package Size: 200.00cm * 200.00cm * 200.00cm
• Package Gross Weight: 1000.000kg

Product Description

 CE Certified 3- Zone Hot Cold Thermal Shock Cycle Chamber

I.Product Overview

Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment , that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. Testing box is divided into three parts, one is high-temperature zone, another is low-temperature zone, the testing samples are placed in the center zone, using unique heat storage and cool storage with valve open and close, let the extremely high and low temperature impact the specimen.


II. Application

It is  applicable for electronics, electrical appliance, mobile phones, communication,meters,vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and other products quality inspection.     
                  
III. Features

Cylinder drive mode
Divided into high temperature zone, low temperature zone, test zone. The high and low temperature zone is used as an energy reserve, and the test zone is used for testing by the user.
The high and low temperature zone is separated from the test zone by a switchable valve. Automatically open the corresponding valve when impact
There is also an independent ventilation valve that introduces ambient air during exhaust (normal temperature recovery)



IV. Standard Compliance

•GB-2423.1-2008(IEC68-2-1) Test A: Low Temperature Test

•GB-2423.2-2008(IEC68-2-2) Test B: High Temperature Test

•GJBl50.3-2009(MIL-STD-810D) High Temperature Test

•GJBl50.4-2009(MIL-STD-810D) Low Temperature Test

•GJBl50.5-2009 Temperature shock test method


V. Main Technical Parameters
 

Model		KTS Series(3-Zone)
		100A/B/D	150A/B/D	200A/B/D	252A/B/D	300A/B/D	480A/B/D
Volume(L)		100L	150L	200L	252L	300L	480L
Interior size	W(cm)	50	60	65	70	80	80
	H(cm)	45	50	46	60	46	75
	D(cm)	45	50	67	65	81.5	81.5
Exterior size	W(cm)	151	162	166	190	181	181
	H(cm)	198	215	198	190.5	198	227
	D(cm)	202	230	230	194	233.5	235
Test weight(KG)		5	5	7.5	10	15	20
High Temp.Chamber		+60ºC~+200ºC
Pre-heating time		from normal temperature RT ~ +200ºC, Within 30 min
Low Temp.Chamber		(A)0ºC~ -40ºC         (B)0ºC~ -55ºC         (D)0ºC~-65ºC
Pre-cooling time		from normal temperature RT ~ -70° C Within 60 min
Temp.Shock Range		(A) -40ºC~+150ºC         (B) -55ºC~+150ºC          (D)-65ºC~+150ºC
Temperature uniformity		<=±2.0ºC
Temperature fluctuation		<=±0.5ºC
Temperature deviation		±2.0ºC
Transfer time		<=5s
Recovery time		<=5min
Noise		<=75dB
Interior material		Stainless steel plate(SUS 304)
Exterior material		Baked painting steel or stainless steel(SUS304)
Insulation material		Rigid polyurethane Foam + glass fiber wool
Refrigeration system		Water Cooled
		Semi-hermetic compressor, cascade refrigeration system,Eco-friendly refrigerant
Controller		Panel:7-inch LCD Touch screen, Chinese / English display for option
		Operation model: Program or fix point running
		Memory capacity:120programs,1200steps, all repeat 999cycles, part repeat 99 cycles.
		Accuracy:Temp.:0.1% of F.S±1 digit     Humidity:0.1% of F.S±1 digit
		Input:Temp.:pt-100                Humidity:pt-100 or ~5V DCV
Safety device		NFB(No fuse breaker), over pressure, over heat and over current protection for compressor, over temperature protection,  over load protection for blower, dry heat protection
Standard accessory		Cable port(portΦ50mm)*1,   shelves*2
Ambient Temp.		+5ºC~+35ºC
Power		AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires
Note: 1. We reserve the right to change specifications without prior notice   2. Customized sizes and configurations available

VI. Product Details



VII. Our Company

VIII. Our Service
Pre-sale Service:

Provide test solution
Send specification and quotation

In-sale Service:

Design
Production
Calibration
Installation
Training
Preventative maintenance

After-sale Service:

24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair

IX.Packing&Shipping


X.FAQ

Q:Are your company a trading one or a factory?
A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.

Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.

Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.

Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.

Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our 
production lead time depends on specific items and item quantities. 

Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.

Q:What about the  product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.

Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.