Two or Three-Zone Thermal Chamber Test Chamber for Electronic Industry

• Power Supply: 380V /220V
• Certification: CE, ISO
• Warranty: 1 Years
• Test Weight: 15kg
• Interrior Size: 670*600*500mm
• Exterrior Size: 1720*2000*1850mm
• Model NO.: KTS-200B
• High Temp. Chamber: +60 Oc~+200 Oc
• Low Temp. Chamber: -70 Oc~-10 Oc
• Pre-Heat Time: +60 Oc~+200 Oc Within 20mins
• Pre-Cold Time: +20 Oc~-70 Oc Within 60mins
• Test Chamber: -55 Oc~+150 Oc
• Material: Stainless Steel
• Transport Package: Strong Plywood Case, Meet International Standard
• Specification: Standard and customized ISO9001, SGS
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 90321000
• Production Capacity: 1000 Sets/Year

Product Description

Two/Three-zone Thermal Shock Test Chamber For Electronic Industry

Application:

Thermal Shock Chamber is used to quickly find the hidden mechanical weaknesses in electronic components 

 when test specimens are exposed to rapid thermal shock condition, and you will not only reduce the premature

 failures but also increase the reliability of your products when you choose our thermal shock test chamber.

Standards Implement and Met

 

GB/T 2443.1-2001 Test A: Low temp. Test;
GB/T 2443.2-2001 Test B: Low temp. Test;
GB/T 2443.22-2002 Test N: Low temp. Test;
GJB 150.3-1986 High Temp. Test;
GJB 150.4-1986 Low temp. Test;
GJB 150.5-1986 Temp. Impact Test;
(Load refer to 5.5.5 no active load)

Technical Parameters:

3 Zone Thermal Shock Test Chamber
Specifications		Note: 1. We reserve the right to change specifications without prior notice  2. Customized sizes and configurations available
Model		KTS-B Series
		72B	100B	150B	200B	252B	300B	480B
Interior size	W(mm)	450	500	600	670	700	800	800
	H(mm)	400	450	500	600	600	600	800
	D(mm)	400	450	500	500	600	650	750
Exterior size	W(mm)	1490	1540	1640	1720	1750	1850	1850
	H(mm)	1790	1840	1890	2000	2000	2000	2200
	D(mm)	1600	1700	1830	1850	1930	1980	2500
Test weight(KG)		5	10	12	15	18	20	20
Low Temp. chamber		-70ºC~-10ºC
Pre-heat time		+20ºC~-70ºC, Within 60 min
Test. chamber		-55ºC~+150ºC
High Temp. chamber		+60ºC~+200ºC
Pre-heat time		+60ºC~+200ºC,Within 20 min
Recovery time		High-Temp Exposure 30 min
		Low-Temp Exposure 30 min
		Recovery time within 5 min
Safety device		No fuse breaker, over pressure\over heat and over current protection for compressor,over-temperature protection, overload protection for the blower, dry heat protection
Standard accessory		Cable port(portΦ50mm)*1,   shelves*2
Interior material		Stainless steel plate(SUS 304)
Exterior material		Baked painting steel or stainless steel(SUS304)
Insulation material		Rigid polyurethane Foam+glass fiber wool
Refrigeration system		Water Cooled
		Semi-hermetic compressor, cascade  refrigeration system, CFC free refrigerant(HFC-507 and HFC-23)
Controller		Panel:7-inch LCD Touch panel, Chinese or English display selectable
		Operation model: Program or fixpoint running
		Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles.
		Accuracy:Temp.:0.1% of F.S±1 digit     Humidity:0.1% of F.S±1 digit
		Input:Temp.:pt-100                Humidity:pt-100 or ~5V DCV
Ambient Temp.		+5ºC~+35ºC
Power		AC 380±10%50Hz,3 phase 4 wires +Ground Wires

KTS-D Series

Model		KTS-D Series
		72D	100D	150D	200D	252D	300D	480D
Inside size(mm)	W	450	500	600	670	700	800	800
	H	400	450	500	600	600	600	800
	D	400	450	500	500	600	650	750
Outside size(mm)	W	1490	1540	1640	1720	1750	1850	1850
	H	1790	1840	1890	2000	2000	2000	2200
	D	1600	1700	1830	1850	1930	1980	2500
Test weight		5	10	12	15	18	20	20
Low Temp Chamber		-80ºC~-10ºC, Pre cooling time: ≤ 60 min from +20ºCto-80ºC

 

Test Chamber	-65ºC~+150ºC
High Temp Chamber	+60ºC~+200ºC ,Within 20 min, Pre-heating time
Transition time	≤15S
Recovery time	High-Temp Exposure 30 min to reach & stabilize required hot temp of test sample
	Low-Temp Exposure 30 min to reach & stabilize required cold temp of test sample
	≤ 5 min
Ambient Temp.	+5ºC~+35ºC
Power	AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires

Main features of the Thermal test chamber:
1. Programmable Controller with RS232C, 7 LCD touch panel control
2. Stainless steel Interior, galvanized steel sheet exterior
3. 2pcs stainless steel loading shelves free
4. Multipane viewing window with heater
5. 50mm diameter feed-through port
6. Floor stand with castors.
1.3-zone design: High-temperature zone, cold temperature zone, and testing zone.
2. The test specimens under test are stationary in the testing zone.
3. Touch-control operation interface for ease of use.
4. Max. 999H and max. 9999 cycles for high or low-temperature shock for thermal shock test chamber.
5. Automatic cycling shock or/and manual selective shock are available
6. Water cooled, binary cooling system for quick cooling effect.


KOMEG FAQ:

Q1. Quality Control System?
A: KOMEG Technology Ind Co., Ltd strictly perform 6S rule, and apply the ISO9000 and ISO14001 Quality control system and strictly carry out in every production stage: from the materials and spare parts suppliers selecting, checking before stocking, to test chambers commissioning, packing, delivery.

Q2. Trade term supported?
A: KOMEG support EXW, FOB, CNF, DAP, DDU, DDP, etc.

Q3. Payment Supported?
A: KOMEG support T/T, L/C AT SIGHT, etc.

Q4. Internation Standard Packaging: 
A: The test chambers are packed with air bubble film firstly, then will be put into the strong ply-wood case, which bot only has the function of good shock-absorption, impact resistance, and heat sealing; but also has the advantages of nontoxic, odorless, moisture-proof, corrosion-resistant, etc. All the measures will protect the environmental test chambers to your site safe and sound.

Q5. Main Markets:
A: English and Russian markets like Asia, Europe, Oceania, America;
Mainly customers are from industries of electronics, materials testing labs, battery, automotive, LED, Solar panels, etc.