Laboratory&Industry Vibration Combined Temperature and Humidity Test Chamber

• After-sales Service: 24 Hours on Line Services
• Power Supply: 380V
• Certification: CE, ISO
• Warranty: 1 Year
• Temp Range: -70 ºC~ +150 ºC
• Temp Constancy: ≤0.5 ºC
• Model NO.: THV-1000
• Temp Uniformity: ±2.0 ºC
• Humidity Constancy: 2.0%Rh ~ 98%Rh
• Heating up Time: 1/3/5/10/15/25c/Min
• Volume: 225L/420L/1m3
• Temperature Accuracy: ±1c
• The Displacement mm: 25
• Transport Package: Strong Plywood Case, Meet International Standard
• Specification: Standard and Customized
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 90321000
• Production Capacity: 1000 Sets Per Year

Product Description

Laboratory&industry Vibration Combined Temperature And Humidity Test Chamber 

Equipment summary:

Vibration Combined Temperature And Humidity Chamber is integrated with mechanical stress test such as temperature, humidity and vibration. When the test system is working, the (high temperature,low temperature and temperature change) stress ,temperature stress, vibration stress and the electric stress should be applied to the specified combination mode and the periodic space operation, simultaneously or separately. 

Corresponding standard:

GB/T 2423 .102_2008 Electrical and electronic environment test, second part: Test methods: temperature (low temperature, high temperature), low pressure, vibration (sinusoidal) synthesis 
GJB 150.24A-2009 Environmental test methods for military equipment test, twenty fourth parts: temperature/ humidity/ vibration/ height test.

Applicable industries:

Now it has been widely used in aerospace, marine, automotive and other electronic products for environmental 

adaptability, the use of reliability assessment, evaluation and the electronic product design defects in the early 

detection and process defects screening and other occasions.
 

Specifications
Model		THV-
		408	1000
Working chamber volume ( L )		408	1000
Interior size ( W*H*D ) mm		600*850*800	1000*1000*1000
Safety device		No fuse breaker, over pressure \ over heat and over current protection for compressor,
		Over temp. protection, over load protection for blower,
		Hydraulic and Water lack Protection dry heat protection
Power		AC 380V/50Hz ,3phase 5 wires+ Ground wire
Temp regulating mode		Balanced Temperature & Humidity Control System ( BTC )
Ambient temp		+5 ºC~ +35 ºC
Performance	Temp range	-70 ºC~ +150 ºC
	Temp constancy	≤0.5 ºC
	Temp uniformity	±2.0 ºC
	Humidity constancy	±2.5%RH
	Humidity range	2.0%RH ~ 98%RH
	Humidity uniformity	If humidity≤75%RHJ, ±3.0%RH ; f humidity > 75%RHJ, ±5.0%RH
	Cooling rate	≤5  ºC /Min or ≤10  ºC /Min  ( -55 ºC~ +80 ºC  within humidity range )
Material	Exterior material	Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel plate
	Interior material	Stainless steel plate(SUS 304)
	Insulation material	Rigid polyurethane foam
Cooling system	compressor	Semi-Hermetic Compressor
	Cooling mode	Water cooled
Heater		Iron-chrome wire heater
Blower		Centrifugal Blower
Sight window		470mm*350mm   Glass incorporating heat generator
Temp sensor		Pt-100
Controller		Touch screen controller
Shaking table		Custom made as required
Note: 1. We reserve the right to change specifications without prior notice                                                                      2. Customized sizes and configurations available

Packaging Details

1.keep the equipment clean with high toughness tensile membrance.

2.use high strength paper corner to prevent equipment from scratch.

3.to use thick bubble bag to prevent the damage caused by friction.

4.packed climate simulation chamber with very strong wooden case.

Our Services

ALL OF OUR TEST CHAMBERS HAS ONE YEAR WARRANTY.

KOMEG REPAIR THE EQUIPMENT IS UNDER THE ORDINARY USAGE AND ARISE ANY HARDWARE PROBLEMS WHICH CAUSED BY PRODUCT ITSELF, RATHER THAN HUMAN ERROR.

FIRSTLY, WE CAN PROVIDE THE SPARE PARTS WITH YOU. AND ALSO PROVIDE THE SOLUTION ABOUT THE TROUBLE OF THE
EQUIPMENTS.

SECONDLY, PLEASE SEND BACK THE EQUIPMENT, WHICH WILL BE REPAIRED BY OUR COMPANY.

LASTLY, WE WOULD LIKE TO APPOINT OUR TECHNICAL ENGINEER TO YOUR COMPANY TO REPAIR THE EQUIPMENT.
 
F A Q   

 1. Do you have any advantages in Vibration Combined Temperature And Humidity Chamber Price? 

KOMEG has 18000 production bases in Dongguan, China. Factory direct sales, can reduce the cost of agency for you.

2. May I ask you how do you deliver Vibration Combined Temperature And Humidity Chamber?

We have so many ways of  Vibration Combined Temperature And Humidity Chamber delivery, such as FOB, CIF,etc.

3. Is there a variety of language options for your operating system?

We use our controller system, it has Russian, English, Chinese, Japanese and other languages.

4. How long is the warranty period of your Vibration Combined Temperature And Humidity Chamber?

We provide free parts replacement service for resories with one year.

5. When will you give a respond if your Vibration Combined Temperature And Humidity Chamber broken down?

We will give you guidance by video conference when we receive your need of requirement.