Large Volume Environmental Simulation thermal cycling chamber
Environmental Testing is vital for a company's reputation and development.
So you are supposed to continue!
Applications
Environmental stress screening (ESS) is also known as Burn-in, AST (Accelerated Stress Testing), HALT (Highly Accelerated Stress Test), or HASS (Highly Accelerated Stress Screening). No matter what the name is, the idea is the same: create a test program that allows you to eliminate the infant mortality of your products.
KOMEG Environmental Stress Screening (ESS) Systems are specially designed to meet a range of ESS testing applications. ESS Systems consist of a test chamber, controller, product fixture, interconnect and wiring, and a functional tester.
Developed to help electronics manufacturers detect product defects and production flaws, Environmental Stress Screening forces infancy product failures that would otherwise occur after final assembly and product delivery. ESS Chambers' goal is to improve profitability by eliminating defective products. ESS Systems can meet individual performance needs, product loading, and throughput requirements. KOMEG Technology has the experience to provide the best solution for ESS testing at your company.
Standards Implemented and met
GB10592-89 Technical requirements for high and low temperature test chamber
GB2423.1-1989 Low temperature test
GB2423.2-1989 High temperature test mode
Features
Rational Construction and fast cooling rate
Frequency conversion control of wind speed.
Adopts international brand of imported parts for cooling system to improve operation reliability
Touch screen controller, friendly Man-Machine interface and safety device to ensure simple operation and easy maintenance.
Here is the technical parameter:
| Specifications |
|
| Model |
ESS-SL |
| 225SL5 |
225SL10 |
408SL5 |
408SL10 |
1000SL5 |
1000SL10 |
1000SL15 |
| Working Chamber Volume(L) |
225 |
408 |
1000 |
| Temp Rate of Change( ºC/Min) |
5 |
10 |
5 |
10 |
5 |
10 |
15 |
| Performance |
-70ºC~+100ºC |
| Rapid Temp Change -55ºC~+85ºC Full Linear Control |
| Humidity Constancy |
±0.5ºC |
| Temp Constancy |
±3.0ºC |
| Exterior Material |
Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel |
| Interior Material |
Stainless Steel Plate(SUS 304) |
| Insulation Material |
Rigid Polyurethane Foam |
| Safety Devices |
over pressure,over heat and over current protection for compressor, over temp. protection, |
| Compressor |
Semi-Hermetic Compressor |
| Cooling Mode |
Water Cooled |
| Control system |
Balanced Temperature & Humidity Control System(BTC type) |
| Heater |
Iron-chrome wire heater |
| Blower |
Centrifugal Blower |
| Observation Window |
Glass incorporating heat generator |
| Temp Sensor |
Pt-100 |
| Controller |
Touch screen programmable controller |
| Ambient Temp. |
+5ºC~+35ºC |
| Power |
AC 380V/50Hz 3phase 5 wires+ Ground wire |
Note:
1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available |
WHO WE ARE?
KOMEG has been specialized in Environmental test chambers since 1990.
WHAT DO WE SUPPLY?
We could manufacturer all kinds of environmental test Chambers. Such as:
1. Temperature & humidity test chamber ( Temperature range: -70ºC~+180ºC,Humidity range: 10%~98%)
2. High low-temperature test chamber( Temperature range: -70~+180ºC)
3. Thermal shock test chamber( Two-zone type and three-zone type)
4. ESS test chamber (Ramp rate: 5ºC/min, 10ºC/min, 15ºC/min, 20ºC/min, 25ºC/min)
5. Salt spray corrosion test chamber
6. Walk-in temperature and humidity test chamber
7. The burn-in room test chamber
8. Temperature & altitude chamber
9. Vibration test chamber
WHY CHOOSE US?
1, Assured Quality
We are constantly updating our product line based on international standards for quality.
2, Competitive Rate
We are competitive compared to most top brands, such as Weiss, Espec, CSZ, etc.
Komeg has a high reputation in the market, also we have after service in Malaysia, Thailand, Italy, and so on. So we can offer you a fast response to service.
The advantage of having our test Chamber KOMEG made:
Features 1: Good Quality Guarantee, The main parts we choose France Tecumseh, USA Copeland, Japan Sanyo…
Features 2: 100% QC Check before shipment. There has 2 times check, during manufacture and before shipment.
Features 3: Good Service System. There has a service team with can help the customer via remote assistance via the internet.
Features 4: The test chambers have got the CE, ISO system approval.
Features 5: Accept OEM. ODM Orders. We accept to make your brand /logo on our environmental chambers.
Benifits more than you can get from other supplier
1. Dedicatetouch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide rang of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties
Besides this, we have a lot of other chamber for your reference:
3-zone/ 2-zone Thermal Shock Chamber
Walk-in Constant Temp. And Humidity Chamber
Programmable temperature and humidity Chamber
Precise Drying Test Chamber
Temperature/ humidity/ vibration three integrated Chamber
Precise Drying Chamber
Vacuum oven/ no oxidation oven
Air Exchange Type Aging Oven
Burn-in Room
Salt spray Chamber
Two wing Drop Tester
Vibration Testing Machine
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}