Walk in Constant Temperature and Humidity Chambers with Factory Price
Walk-In Chamber serves as a test site for large components, assemblies, and finished products in electrical and electronics,aerospace, batteries and automobiles, etc.
KOMEG manufactures both Static Walk-In Chambers and Dynamic Walk-In Chambers and can be configured as a temperature chamber or a temperature humidity chamber.
The KOMEG-Series walk-in temperature and climate test chambers are especially developed for large test specimens. Size and design are optimal loading of test specimens. The modular construction and variability in size and equipment is ideally forspecific application.
Application:
Walk in chambers can be used for testing and controlled storage as well as a multifunctional laboratory environment for conducting test procedures in the telecommunications, defense, aerospace, pharmaceutical, automotive, and electronics industries. Chamber sizes can always be customized to your testing needs.
Optional accessories:
Cable Port: Two size of cable port is available: Φ 50mm, Φ 100mm.
Double door
Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test.
Carry-in inclined platform: Provided below the door to facilitate moving of specimens in and out through the door.
Entire ceiling blow-out duct
The extremely wide air inlet reduces the airflow rate (down to apprrox. 0.5m/s)
Dehumidifier
The rotation regenerating dehumidifier (M-300)ensures precise control of low humidity (21º C, 23%RH)for electrostatic reliability tests.
Temperature and humidity recorder
100mm width recording paper with 6 dots
180mm width recording paper with 12 dots
Status indication lamp
Provide to signal chamber status and warnings when normal running, a malfunction running or stand by occurs.
Water purifier
Provided to keep the humidifier heater free from scale and ensure the supply of water to humidifier.
Power socket
Air cooled type condense
Welcome to visit gdkomeg.en.made-in-china.com
Please check below table and contact us now for more details.
| Specification of Walk-In Chambers |
|
| Model |
KMHW-4 |
| Volume(m³) |
4CBM |
| Interior Dimensions |
W2100*H2100*D2050mm |
| Exterior Dimensions |
W3250*H2350*D2250mm |
| Safety Devices(standard) |
No fuse breaker, over pressure\over heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection |
| Standard accessories |
Sight window*1,cable port(portΦ50mm)*1,chamber lamp*1, status indicator |
| Control System |
Balanced Temperature & Humidity Control System |
| Refrigeration system |
Water Cooled |
| Semi-hermetic compressor, single stage or cascade refrigeration system, |
| CFC free refrigerant(HFC-507 and HFC-23) |
| Controller |
Panel |
7-inch LCD Touch panel,Chinese or English display selectable |
| Operation model |
Program or fix point running |
| Memory capacity |
120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles |
| Accuracy |
Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit |
| Input |
Temp.:pt-100, Humidity:pt-100 or ~5V DCV |
| Comm.port |
RS-232 or RS-485 (Softawre is option) |
| Temp. range |
Maximum:80ºC,120ºC;Minimum:-60ºC,-50ºC,-40 ºC,-30ºC,-20 ºC,-10ºC,0ºC |
| Humidity Range |
10%,20%,30%~95% |
| Temp. constancy |
±0.5ºC |
| Humidity constancy |
±2.5%R.H |
| Temp. uniformity |
±2.0ºC |
| Humidity uniformity |
±5.0%R.H |
| Ambient Temp. |
+5ºC~+35ºC |
| Wiring method |
AC 380±10%50Hz ,3 phase 4 wires +Ground Wires |
| Heat up time |
+20ºC~+80ºC,Within 60 min |
| Pull down time |
+20ºC~-55ºC\-40ºC\-20ºC\-10ºC,Within 120 or 90 or 60 min |
| Interior material |
Stainless Steel Plate(SUS 304) |
| Exterior material |
Baked Painting Steel Or Stainless steel(SUS304) |
| Insulation material |
Rigid polyurethane foam |
| Door size (mm) |
Single wing:W800*H1800;Double wing:W1600*H1800; |
Note:1. We reserve the right to change specifications without prior notice
2.Customized sizes and configurations available |
Established in 1990, Guangdong KOMEG Industrial Co., Ltd has headquartered in Songshan Lake, Dongguan. It is an innovative high-tech enterprise specializing in reliability test technology research and climate environment simulation equipment. We have an experienced and skilled team with nearly 160 employees. We have three production bases in Guangdong Factory I, Factory II and Jiangsu Factory with 20,000+m² of modern workshops to meet customers' non-standard customized production requirements. We have a series of equipment suitable for various industries including aerospace, transportation, electronic components, energy materials, information communication, medical and chemical industries for customers to choose from.
KOMEG specialized in manufacturing a variety of quality inspection instruments, testing equipments and other high-tech products which mainly include: Constant Temperature & Humidity Test Chamber,High & Low Temperature Test Chamber, High & low Temperature Testers with Rapid Temperature Change, Walk-In humidity & temperature test chamber, Cool/Thermal shock test chamber, Salt spray chamber, High temperature aging tester, high and low temperature testing machine , Battery Temperature tester, mechanical vibration tester, Battery burning tester and other quality testing instruments. Thanks to several decades of R&D efforts,the company has established itself as a leading provider of testing instruments of the industry, playing a crucial role in the research and development of high-quality and high-value products within the industry.
FAQ
1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers.
If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2. What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 30-40 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4. How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly.
Most of our machine is shipped with a whole part, which means it is already insta
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}