CE Battery Testing High Low Temp 3-Zone Thermal Shock Test Chamber

• Customization: Available
• Power Supply: 380V
• Certification: CE, TUV, ISO
• Model NO.: KTS-480A
• Warranty: 2 Years
• Test Weight: 10kg
• Interrior Material: 500*450*450mm
• Exterrior Material: 1540*1840*1700mm
• Conversion Time: 5 Mins
• Chamber Quantity: 3 Zones
• Testing Samples: Can Be with Load
• Transport Package: Strong Plywood Case, Meet International Standard
• Specification: Standard and customized, ISO9001, SGS, CE, TUV, UL
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 90321000
• Production Capacity: 1000 Sets Per Yesr
• Package Size: 200.00cm * 200.00cm * 200.00cm
• Package Gross Weight: 1000.000kg

Product Description

CE Battery Testing High Low Temp 3-Zone Thermal Shock Test Chamber 

 
Main technical specification

(1) KTS-A Series

Model		KTS-A Series
		72A	100A	150A	200A	252A	300A	480A
Inside size(mm)	W	450	500	600	670	700	800	800
	H	400	450	500	600	600	600	800
	D	400	450	500	500	600	650	750
Outside size(mm)	W	1490	1540	1640	1720	1750	1850	1850
	H	1790	1840	1890	2000	2000	2000	2200
	D	1600	1700	1830	1850	1930	1980	2500
Test weight		5	10	12	15	18	20	20
Low Temp Chamber		-55ºC~-10ºC, Pre cooling time: ≤ 60 min from +20ºCto-55ºC
Test Chamber		-40ºC~+150ºC
High Temp Chamber		+60ºC~+200ºC ,Within 20 min, Pre-heating time
Transition time		≤15S
Recovery time		High-Temp Exposure 30 min to reach & stabilize required hot temp of test sample
		Low-Temp Exposure 30 min to reach & stabilize required cold temp of test sample
		≤ 5 min
Ambient Temp.		+5ºC~+35ºC
Power		AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires

4.  Below are differences between 3-zone and 2-zone thermal shock chamber:

3-zone thermal shock chamber:

three chamber in total: test space, high temp. chamber and low temp. chamber;

Advantage: slight limitation for test sample's weight, the test sample keep still, this can reduce the impact to samples by moving it, can be used for on-load testing.

Compared with 2-zone type, relatively low failure rate, low cost.

Disadvantage: long conversion time

2-zone thermal shock chamber:

only two chambers: high temp. Chamber and low temp. chamber

Advantage: short conversion time, smaller space needed

Disadvantage: test sample moving. test samples' size is limited by the basket size

Photos show