Rapid Temperature Change Test ESS Chamber 10deg C / min
Environmental Testing is vital for a company's reputation and development.
So you are supposed to continue!
Features
Rational Construction and fast cooling rate
Frequency conversion control of wind speed.
Adopts international brand of imported parts for cooling system to improve operation reliability
Touch screen controller, friendly Man-Machine interface and safety device to ensure simple operation and easy maintenance.
KOMEG Advantage
1. There are many suppliers in China, and in very different level. different quality and different price. The company scale as large as us are not very much. we have factory covers 18000 sqm, with 150 staffs in total.
In our factory, each process have strictly quality control management.
2. All the spare parts we used is European and America imported, we are not reduce quality of martial.
a.) Compressor we use America Copeland, Emerson oil separator, danfoss magnetic valves and Schneider electrical spare parts. and so on. others may use parts of spare parts famous brand.
b.) We use modular design, reasonable design, easy maintenance.
c.) Insulation are used 100 mm thickness high density rigid polyurethane foam with glue and gel around, if seal is not good, after long time for testing, low temperature or humidity test, the water will permeate into the wall, and it will affect the uniformity.
d.) Electrical design is well aligned, it's very clear, each line have unique code, not only convenient for your troubleshooting, but also easy for our engineer troubleshooting.
3. Fluid simulation reach, thanks to our R&D department, we are the Chinese No.1 doing fluid simulation research, It can save about 10% power consumption on the compressors.
Besides this, we have a lot of other chamber for your reference:
3-zone/ 2-zone Thermal Shock Chamber
Walk-in Constant Temp. And Humidity Chamber
Programmable temperature and humidity Chamber
Precise Drying Test Chamber
Temperature/ humidity/ vibration three integrated Chamber
Precise Drying Chamber
Vacuum oven/ no oxidation oven
Air Exchange Type Aging Oven
Burn-in Room
Salt spray Chamber
Two wing Drop Tester
Vibration Testing Machine
Applications
Temperature adaptability test under the condition of rapid change, or gradient for electrical, electronic, instruments and other products or spareparts, particularly applies to environmental stress screening test(ESS)
Standards Implemented and met
GB10592-89 Technical requirements for high and low temperature test chamber
GB2423.1-1989 Low temperature test
GB2423.2-1989 High temperature test mode
Benifits more than you can get from other supplier
1. Dedicatetouch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide rang of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties
Here is the technical parameter:
| Specifications |
|
| Model |
ESS-SL |
| 225SL5 |
225SL10 |
408SL5 |
408SL10 |
1000SL5 |
1000SL10 |
1000SL15 |
| Working Chamber Volume(L) |
225 |
408 |
1000 |
| Temp Rate of Change( ºC/Min) |
5 |
10 |
5 |
10 |
5 |
10 |
15 |
| Performance |
-70ºC~+100ºC |
| Rapid Temp Change -55ºC~+85ºC Full Linear Control |
| Humidity Constancy |
±0.5ºC |
| Temp Constancy |
±3.0ºC |
| Exterior Material |
Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel |
| Interior Material |
Stainless Steel Plate(SUS 304) |
| Insulation Material |
Rigid Polyurethane Foam |
| Safety Devices |
over pressure,over heat and over current protection for compressor, over temp. protection, |
| Compressor |
Semi-Hermetic Compressor |
| Cooling Mode |
Water Cooled |
| Control system |
Balanced Temperature & Humidity Control System(BTC type) |
| Heater |
Iron-chrome wire heater |
| Blower |
Centrifugal Blower |
| Observation Window |
Glass incorporating heat generator |
| Temp Sensor |
Pt-100 |
| Controller |
Touch screen programmable controller |
| Ambient Temp. |
+5ºC~+35ºC |
| Power |
AC 380V/50Hz 3phase 5 wires+ Ground wire |
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
| Specifications |
|
| Model |
ESS-LL |
| 225LL5 |
225LL10 |
408LL5 |
408LL10 |
1000LL5 |
1000LL10 |
| Working Chamber Volume(L) |
225 |
408 |
1000 |
| Temp Rate of Change( ºC/Min) |
5 |
10 |
5 |
10 |
5 |
10 |
| Performance |
-70ºC~+100ºC |
| Rapid Temp Change -40ºC~+85ºC Full Linear Control |
| Humidity Constancy |
±0.5ºC |
| Temp Constancy |
±3.0ºC |
| Exterior Material |
Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel |
| Interior Material |
Stainless Steel Plate(SUS 304) |
| Insulation Material |
Rigid Polyurethane Foam |
| Safety Devices |
over pressure,over heat and over current protection for compressor, over temp. protection, |
| Compressor |
Semi-Hermetic Compressor |
| Cooling Mode |
Water Cooled |
| Control system |
Balanced Temperature & Humidity Control System(BTC type) |
| Heater |
Iron-chrome wire heater |
| Blower |
Centrifugal Blower |
| Observation Window |
Glass incorporating heat generator |
| Temp Sensor |
Pt-100 |
| Controller |
Touch screen programmable controller |
| Ambient Temp. |
+5ºC~+35ºC |
| Power |
AC 380V/50Hz 3phase 5 wires+ Ground wire |
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
KOMEG Advantage
){kind=link}