Climate Simulation Chamber Customized Environmental Test Chamber Since 1990 (KMH-1000S)
Benifits more than you can get from other suppliers:
1. Delicate touch and excellent user experience;
2. Unique and compact design, topgrade appearance, stable performance and easy operation;
3. Can simulate a wide range of temperature and humidity environments;
4. Capable of testing large components, assemblies, and finished products;
5. Customized sizes and configurations avaible;
6. One year warranty
Specifications:
Workspace volume: 1, 000 X 1, 000 X 1, 000mm
Exterior size: 1, 280 X 2, 200 X 1, 928mm
Temperature: -70 to 150° C
Temperature error: ± 2.0° C
Temperature constancy: ± 0.5° C
Temperature uniformity: ± 2.0° C
Temperature change rate: +20 -70° C within 75-minute (with empty loading) and -70 +100° C within 65 minutes (with empty loading)
Humidity range: 20 to 98% RH
Humidity error: ± 2% RH
Humidity constancy: 3.0% RH
Humidity uniformity: ± 2.0% RH
Insulation:
Exterior, baked painting steel or stainless steel (SUS304)
Interior, mist finishing stainless steel (SUS304)
Insulation material, rigid polyurethane foam and glass fiber
Door: Heating wire was installed to prevent condensation in case of low-temperature
Inspection window (W X H): 2 sets 2, 470 X 570mm inspection window, made of multi-layer coated hollow electric glass, effectively insulation and prevents condensation
Light device: 11W/220V AC X 1 installed on the inspection window
Water outlet: Water outlet available for condenser
Water replenishment: Water pump
Features:
Standard configurations:
Sight window X 1
Cable port (port Ø 50mm) X 1
Shelves X 2
Chamber lamp X 1
Power cable X 2m
No fuse breaker, over-pressure, over-heat and over-current for compressor, over-temperature, overloading of blower, dry heat-protection
Optional accessories:
Cable port: Ø 100mm is available
Shelves
RO-type water purifier: R-80/day
Provided to keep the humidifying heater and wet bulb wick free from scale
Inner glass door with operating port: A glass door can be provided behind the main door so that specimens can be observed
Two operating ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures precise control of low-humidity (5° C 5% RH) for electronics
Detailed specifications:
| Environmental Temperature and Humidity Chamber |
| Secifications ( at +20°C room temp. Or+25°C water temp with empty load) |
| Model |
KMH-S series |
| 225S |
408S |
800S |
1000S |
| Interior sizel |
W(mm) |
700 |
700 |
1000 |
1000 |
| H(mm) |
700 |
750 |
1000 |
1000 |
| D(mm) |
480 |
800 |
800 |
1000 |
| Exterior size |
W(mm) |
980 |
980 |
1280 |
1280 |
| H(mm) |
1890 |
1940 |
2160 |
2160 |
| D(mm) |
1460 |
1740 |
1750 |
1950 |
| Weight(KG) |
330 |
450 |
550 |
650 |
| Temp. range |
-70 °C ~+150°C |
| Humidity Range |
20 ~ 98&R.H. |
| Temp. constancy |
±0.5ºC |
| Humidity constancy |
±2.5%R.H |
| Humidity uniformity |
±3.0%R.H |
±5.0 % R.H |
| Heat up time |
-70°C ~ +100°C , within 60 min |
| Pull down time |
+20°C ~ -70°C , within 80 min |
| Equipment Power |
9.5KW |
10.6KW |
18.5KW |
18.5KW |
| Ambient Temp. |
5ºC ~+35ºC |
| Standard accessories |
Sight window*1, cable port(portΦ50mm)*1, shelves*2, chamber lamp*1, power cable *2m |
| Safety device (standard) |
No fuse breaker, over pressure \ over heat and over current protection for compressor,
Over temp. protect, over load protect of blower, dry heat protection |
| Control System |
Balanced Temperature & Humidity Control System |
| Refrigeration system |
Air Cooled (Water Cooled Type is option) |
Hermetic compressor,Cascsde Refrigeration,
CFC-Free refrigerant(HFC-507/HFC-23) |
| Controller |
Panel:7-inch LCD Touch panel, Chinese or English display selectable |
| Operation model :Program or fix point running |
| Memory capacity :120programs,1200steps, |
| All repeat 999 cycles, part repeat 99 cycles |
| Interior material |
Stainless Steel Plate ( SUS 304 ) |
| Exterior material |
Baked Painting Steel Or Stainless steel(SUS304) |
| Insulation material |
Rigid polyurethane Foam and Glass Fiber Wool |
| System |
Balanced & Humidity Control System |
| Wiring method |
AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires |
Note: 1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available |
WHO WE ARE?
KOMEG has been specialized in Environmental test chambers since 1990.
WHAT DO WE SUPPLY?
We could manufacturer all kinds of environmental test Chambers. Such as:
1. Temperature & humidity test chamber ( Temperature range: -70ºC~+180ºC,Humidity range: 10%~98%)
2. High low-temperature test chamber( Temperature range: -70~+180ºC)
3. Thermal shock test chamber( Two-zone type and three-zone type)
4. ESS test chamber (Ramp rate: 5ºC/min, 10ºC/min, 15ºC/min, 20ºC/min, 25ºC/min)
5. Salt spray corrosion test chamber
6. Walk-in temperature and humidity test chamber
7. The burn-in room test chamber
8. Temperature & altitude chamber
9. Vibration test chamber
WHY CHOOSE US?
1, Assured Quality
We are constantly updating our product line based on international standards for quality.
2, Competitive Rate
We are competitive compared to most top brands, such as Weiss, Espec, CSZ, etc.
Komeg has a high reputation in the market, also we have after service in Malaysia, Thailand, Italy, and so on. So we can offer you a fast response to service.
The advantage of having our test Chamber KOMEG made:
Features 1: Good Quality Guarantee, The main parts we choose France Tecumseh, USA Copeland, Japan Sanyo…
Features 2: 100% QC Check before shipment. There has 2 times check, during manufacture and before shipment.
Features 3: Good Service System. There has a service team with can help the customer via remote assistance via the internet.
Features 4: The test chambers have got the CE, ISO system approval.
Features 5: Accept OEM. ODM Orders. We accept to make your brand /logo on our environmental chambers.
Packaging:
Each set protected with resin fiber and PP film, then put into strong wooden case with operation mannual and video inside.
After-sale service:
If you face any problems in future during testing process, we promise we will give you a reply within 48 hours. And we will provide solution within 3 working days.
We can offer operation video and English operation muanual. We can provide video-conference.
If customers require on-site service, the transport and travel expense shall be borne by customer. Kindly understanding.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}