Komeg Programmable Temperature Humidity and Vibration Combined Test Chamber
Equipment summary:
Vibration Combined Temperature And Humidity Chamber is integrated with mechanical stress test such as temperature, humidity and vibration. When the test system is working, the (high temperature,low temperature and temperature change) stress ,temperature stress, vibration stress and the electric stress should be applied to the specified combination mode and the periodic space operation, simultaneously or separately.
Corresponding standard:
GB/T 2423 .102_2008 Electrical and electronic environment test, second part: Test methods: temperature (low temperature, high temperature), low pressure, vibration (sinusoidal) synthesis
GJB 150.24A-2009 Environmental test methods for military equipment test, twenty fourth parts: temperature/ humidity/ vibration/ height test.
Applicable industries:
Now it has been widely used in aerospace, marine, automotive and other electronic products for environmental
adaptability, the use of reliability assessment, evaluation and the electronic product design defects in the early
detection and process defects screening and other occasions.
| Specifications |
|
| Model |
THV- |
| 408 |
1000 |
| Working chamber volume ( L ) |
408 |
1000 |
| Interior size ( W*H*D ) mm |
600*850*800 |
1000*1000*1000 |
| Safety device |
No fuse breaker, over pressure \ over heat and over current protection for compressor, |
|
| Over temp. protection, over load protection for blower, |
|
| Hydraulic and Water lack Protection dry heat protection |
|
| Power |
AC 380V/50Hz ,3phase 5 wires+ Ground wire |
| Temp regulating mode |
Balanced Temperature & Humidity Control System ( BTC ) |
| Ambient temp |
+5 ºC~ +35 ºC |
| Performance |
Temp range |
-70 ºC~ +150 ºC |
| Temp constancy |
≤0.5 ºC |
| Temp uniformity |
±2.0 ºC |
| Humidity constancy |
±2.5%RH |
| Humidity range |
2.0%RH ~ 98%RH |
| Humidity uniformity |
If humidity≤75%RHJ, ±3.0%RH ; f humidity > 75%RHJ, ±5.0%RH |
| Cooling rate |
≤5 ºC /Min or ≤10 ºC /Min ( -55 ºC~ +80 ºC within humidity range ) |
| Material |
Exterior material |
Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel plate |
| Interior material |
Stainless steel plate(SUS 304) |
| Insulation material |
Rigid polyurethane foam |
| Cooling system |
compressor |
Semi-Hermetic Compressor |
| Cooling mode |
Water cooled |
| Heater |
Iron-chrome wire heater |
| Blower |
Centrifugal Blower |
| Sight window |
470mm*350mm Glass incorporating heat generator |
| Temp sensor |
Pt-100 |
| Controller |
Touch screen controller |
| Shaking table |
Custom made as required |
Note:
1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
){kind=link}