Large Volume Constant Walk-in Temp and Humidity Climatic Chamber
KOMEG Prefer Long term Cooperation to Short Profit.
KOMEG want to be your trustworthy supplier from China.
Walk-in Chamber is consist of Control Panel, electrical panels, moisturizing plate blower, heater, humidifier, freezer. It provides a large spare to test the temperature and humidity for large-scale parts, semi-finished products, it applied to test products that large-scale or the quantity more, such as: computer terminals, vehicle parts.
Optional accessories
Cable Port: Two size of cable port is available: Φ50mm, Φ100mm.
Double door
Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test.
Carry-in inclined platform: Provided below the door to facilitate moving of specimens in and out through the door.
Entire ceiling blow-out duct
The extremely wide air inlet reduces the airflow rate (down to apprrox.0.5m/s)
Dehumidifier
The rotation regenerating dehumidifier (M-300)ensures precise control of low humidity (21 ºC,23%RH)for electrostatic reliability tests.
Temperature and humidity recorder
100mm width recording paper with 6 dots
180mm width recording paper with 12 dots
Status indication lamp
Provide to signal chamber status and warnings when normal running, a malfunction running or stand by occurs.
Water purifier
Provided to keep the humidifier heater free from scale and ensure the supply of water to humidifier.
Power socket
Air cooled type condense
Your company has just developed a great new product,
and now it is your job to select an environmental test
chamber to test it and make sure it will hold up.
Komeg has business on reliability test equipment for more than 20years.
KOMEG is widely recognized and commended bu the top 500comopanies and also customers from electronic, computer, home appliance, communications, chemical industry and scientific reseach.
In 2003, Komeg did the reseach and development of the main equipment with the Pecking University for state key laboratory of environment and pollution simulation(located in Shenzhen HIgh-Tech Park, and funded by national natural science foundation.)
After-sale service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Technical Parameter
| Specification of Walk-In Chambers |
|
| Model |
KMHW-21 |
| Volume(m³) |
43.3CBM |
| Interior Dimensions |
W4800*H2100*D4300mm |
| Exterior Dimensions |
W5950*H2350*D4500mm |
| Safety Devices(standard) |
No fuse breaker, over pressure\over heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection |
| Standard accessories |
Sight window*1,cable port(portΦ50mm)*1,chamber lamp*1, status indicator |
| Control System |
Balanced Temperature & Humidity Control System |
| Refrigeration system |
Water Cooled |
| Semi-hermetic compressor, single stage or cascade refrigeration system, |
| CFC free refrigerant(HFC-507 and HFC-23) |
| Controller |
Panel |
7-inch LCD Touch panel,Chinese or English display selectable |
| Operation model |
Program or fix point running |
| Memory capacity |
120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles |
| Accuracy |
Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit |
| Input |
Temp.:pt-100, Humidity:pt-100 or ~5V DCV |
| Comm.port |
RS-232 or RS-485 (Softawre is option) |
| Temp. range |
Maximum:80ºC,120ºC;Minimum:-60ºC,-50ºC,-40 ºC,-30ºC,-20 ºC,-10ºC,0ºC |
| Humidity Range |
10%,20%,30%~95% |
| Temp. constancy |
±0.5ºC |
| Humidity constancy |
±2.5%R.H |
| Temp. uniformity |
±2.0ºC |
| Humidity uniformity |
±5.0%R.H |
| Ambient Temp. |
+5ºC~+35ºC |
| Wiring method |
AC 380±10%50Hz ,3 phase 4 wires +Ground Wires |
| Heat up time |
+20ºC~+80ºC,Within 60 min |
| Pull down time |
+20ºC~-55ºC\-40ºC\-20ºC\-10ºC,Within 120 or 90 or 60 min |
| Interior material |
Stainless Steel Plate(SUS 304) |
| Exterior material |
Baked Painting Steel Or Stainless steel(SUS304) |
| Insulation material |
Rigid polyurethane foam |
| Door size (mm) |
Single wing:W800*H1800;Double wing:W1600*H1800; |
| Note:1. We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}