| Customization: | Available |
|---|---|
| Max Diameter of Workpiece: | 500mm |
| Mass Scope of Workpiece: | 900kg |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High And Low Temperature Test Chamber Two Sides Door Open For Oil
OEM and ODM are welcome
|
Main technical parameters ( water-cooled, temperature +25ºC, no load)
|
|
| 1.Temperature range |
-70ºC ~ +180ºC(Different temperature range per customer requirements)
|
| 2.Temperature deviation | ±2.0ºC |
| 3.Temperature fluctuation | <=1.0ºC |
| 4.Temperature uniformity | <=±2.0ºC |
|
5.Heating up rate&Cooling down rate
|
from 25ºC to +150ºC whole process average>=3ºC/min Load 50 kg aluminum alloy
from +25ºC to -40ºCwhole process average >=2ºC/min Load 50kg aluminum alloy |
|
The temperature performance test is based on the relevant provisions of the IEC 60068 -3
standard; the sensor is placed at the unit air outlet. |
|
|
Chamber structure
|
|
|
The test chamber adopts the overall structure, the upper part is the working chamber, the rear side is
the refrigeration unit, the lower right space (>=700mm) is vacant to install the hydraulic part device, the
right is the electric control cabinet, the control panel is located on the right front side; the width direction
opens the door , the right side is the air duct system; the air supply motor, the centrifugal fan blade, the
heater, and the evaporator.
|
|
| 1.Chamber size |
Inner size: W 1800 × H 1200 × D 1200 mm
Outer size :W 2935 × H 2170 × D 1450 mm approx |
){kind=link}