Constant Programmable Benchtop Temp. and Humidity Test Chamber
Temperature humidity test chamber is use to test material heat,cold,dry resistance, humidity resistance.Suitable for electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.
Benifits more than you can get from other suppliers:
1. Delicate touch and excellent user experience;
2. Unique and compact design, topgrade appearance, stable performance and easy operation;
3. Can simulate a wide range of temperature and humidity environments;
4. Capable of testing large components, assemblies, and finished products;
5. Customized sizes and configurations avaible;
6. One year warranty
Packaging:
Each set protected with resin fiber and PP film, then put into strong wooden case with operation mannual and video inside.
After-sale service:
If you face any problems in future during testing process, we promise we will give you a reply within 48 hours. And we will provide solution within 3 working days.
We can offer operation video and English operation muanual. We can provide video-conference.
If customers require on-site service, the transport and travel expense shall be borne by customer. Kindly understanding.
Insulation:
Exterior, baked painting steel or stainless steel (SUS304)
Interior, mist finishing stainless steel (SUS304)
Insulation material, rigid polyurethane foam and glass fiber
Door: Heating wire was installed to prevent condensation in case of low-temperature
Inspection window (W X H): 2 sets 2, 470 X 570mm inspection window, made of multi-layer coated hollow electric glass, effectively insulation and prevents condensation
Light device: 11W/220V AC X 1 installed on the inspection window
Water outlet: Water outlet available for condenser
Water replenishment: Water pump
Features:
Standard configurations:
Sight window X 1
Cable port (port Ø 50mm) X 1
Shelves X 2
Chamber lamp X 1
Power cable X 2m
No fuse breaker, over-pressure, over-heat and over-current for compressor, over-temperature, overloading of blower, dry heat-protection
Optional accessories:
Cable port: Ø 100mm is available
Shelves
RO-type water purifier: R-80/day
Provided to keep the humidifying heater and wet bulb wick free from scale
Inner glass door with operating port: A glass door can be provided behind the main door so that specimens can be observed
Two operating ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures precise control of low-humidity (5° C 5% RH) for electronics
| Benchtop Climatic Chamber |
| Secifications ( at +20ºC room temp. Or+25ºC water temp with empty load) |
| Model |
KMH-36L |
| 36L chamber volume |
| Temp. range |
-50 ºC~+150ºC |
| Interior sizel |
W(mm) |
300 |
| H(mm) |
400 |
| D(mm) |
300 |
| Exterior size |
W(mm) |
460 |
| H(mm) |
780 |
| D(mm) |
1020 |
| Power(KW) |
4.5 |
| Weight(KG) |
100 |
| Temp. constancy |
±0.5ºC |
| Temp. uniformity |
±2.0ºC |
| Heat up time |
-50ºC~+150ºC, within 70 min |
| Pull down time |
+20ºC~-50ºC , within 60 min |
| Humidity Range |
20~98%R.H |
| Humidity constancy |
±2.5%R.H |
| Standard accessories |
Sight window*1, cable port(portΦ50mm)*1, shelves*2, chamber lamp*1, power cable *2m |
| Safety device (standard) |
No fuse breaker, over pressure\over heat and over current protection for compressor, |
| Over temp. protect, over load protect of blower, dry heat protection |
| Control System |
Balanced Temperature & Humidity Control System |
| Refrigeration system |
Air Cooled (Water Cooled Type is option) |
| Hermetic compressor,Single stage refrigeration system |
| CFC-Free refrigerant(HFC-507/HFC-23) |
| Controller |
Panel:7-inch LCD Touch panel, Chinese or English display selectable |
| Operation model :Program or fix point running |
| Memory capacity :120programs,1200steps, |
| All repeat 999 cycles, part repeat 99 cycles |
| Interior material |
Stainless Steel Plate(SUS 304) |
| Exterior material |
Baked Painting Steel Or Stainless steel(SUS304) |
| Insulation material |
Rigid polyurethane Foam and Glass Fiber Wool |
| Ambient Temp. |
+5ºC~+35ºC |
| Wiring method |
AC220,50Hz ,1phase 2 wires +Ground Wires |
Note:
1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available |
Established in 1990, Guangdong KOMEG Industrial Co., Ltd has headquartered in Songshan Lake, Dongguan. It is an innovative high-tech enterprise specializing in reliability test technology research and climate environment simulation equipment. We have an experienced and skilled team with nearly 160 employees. We have three production bases in Guangdong Factory I, Factory II and Jiangsu Factory with 20,000+m² of modern workshops to meet customers' non-standard customized production requirements. We have a series of equipment suitable for various industries including aerospace, transportation, electronic components, energy materials, information communication, medical and chemical industries for customers to choose from.
KOMEG specialized in manufacturing a variety of quality inspection instruments, testing equipments and other high-tech products which mainly include: Constant Temperature & Humidity Test Chamber,High & Low Temperature Test Chamber, High & low Temperature Testers with Rapid Temperature Change, Walk-In humidity & temperature test chamber, Cool/Thermal shock test chamber, Salt spray chamber, High temperature aging tester, high and low temperature testing machine , Battery Temperature tester, mechanical vibration tester, Battery burning tester and other quality testing instruments. Thanks to several decades of R&D efforts,the company has established itself as a leading provider of testing instruments of the industry, playing a crucial role in the research and development of high-quality and high-value products within the industry.
FAQ
1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers.
If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2. What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 30-40 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4. How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
Audited Supplier 
){kind=link}
){kind=link}