Programmable Temperature and Humidity Test Chamber (KMH-800S)
Standard configuration
Sight window*1, cable port(portΦ 50mm)*1, shelves*2, chamber lamp*1, power cable *2m
No fuse breaker, over pressure, over heat and over current protection for compressor,
Over temperature protection, over load protect of blower, dry heat protection
Optional accessories
Cable Port: Φ 100mm cable port is available
Shelves
RO-type water purifier: R-80/day
Provide to keep the humidifying heater and wet bulb wick free from scale.
Inner glass door with operation port
A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door.
Dehumidifier
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (5 ° C 5%RH) for electrostatic reliability tests.
Temperature and humidity recorder
-100 to +150° C/0 to 100%RH 100mm with effective width 100mm and 2 pen
Temperature 1 pen and humidity 1 pen.
-100 to +150° C Celsius/0 to 100%RH 100mm with effective width 100mm and 6 dots
Temperature 3 dots and humidity 1 DOT.
-100 to +150° C/0 to 100%RH 100mm with effective width 180mm and 12 dots
Temperature 6 dots and humidity 6 dots.
Defrosting circuit
The chamber automatically detects and melts the frost on the evaporator when operating below 0Fahrenheit degrees Celsius
Liquid or infection
In order to rapidly decrease the temperature inside the chamber, a cylinder of liquid can be connected the chamber.
| Fittings |
Sight window*1, cable port(portΦ50mm)*1, shelves*2, chamber lamp*1, power cable *2m |
| Safety device (standard) |
No fuse breaker, over pressure \ over heat and over current protection for compressor,
Over temp. protect, over load protect of blower, dry heat protection |
| Control System |
Balanced Temperature & Humidity Control (BTHC) System |
| Interface |
RS-485, Can be connected Ethernet(LAN) via professional software. |
| Refrigeration system |
Air Cooled ( Water Cooled Type is option ) |
| Hermetic compressor,Single stage refrigeration system, CFC-Free refrigerant(HFC-507/HFC-23) |
|
|
| Controller |
Panel:7-inch LCD Touch Screen panel, Chinese or English display selectable |
| Operation model :Program or fix point running |
| Memory capacity :120programs,1200steps, |
| All repeat 999 cycles, part repeat 99 cycles |
| Interior material |
Stainless Steel Plate ( SUS 304 ) |
| Exterior material |
Baked Painting Steel Or Stainless steel(SUS304) |
| Insulation material |
Rigid polyurethane Foam and Glass Fiber Wool |
| Ambient Temp. |
+5 °C~ +35 °C (41 ~ 95°F) |
| Power supply |
AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires |
Note:
1. Customized sizes and configurations available
2. We reserve the right to change specifications without prior notice |
WHO WE ARE?
KOMEG has been specialized in Environmental test chambers since 1990.
WHAT DO WE SUPPLY?
We could manufacturer all kinds of environmental test Chambers. Such as:
1. Temperature & humidity test chamber ( Temperature range: -70ºC~+180ºC,Humidity range: 10%~98%)
2. High low-temperature test chamber( Temperature range: -70~+180ºC)
3. Thermal shock test chamber( Two-zone type and three-zone type)
4. ESS test chamber (Ramp rate: 5ºC/min, 10ºC/min, 15ºC/min, 20ºC/min, 25ºC/min)
5. Salt spray corrosion test chamber
6. Walk-in temperature and humidity test chamber
7. The burn-in room test chamber
8. Temperature & altitude chamber
9. Vibration test chamber
WHY CHOOSE US?
1,Assured Quality
We are constantly updating our product line based on international standards for quality.
2,Competitive Rate
We are competitive compared to most top brands, such as Weiss, Espec, CSZ, etc.
Komeg has a high reputation in the market, also we have after service in Malaysia, Thailand, Italy, and so on. So we can offer you a fast response to service.
The advantage of having our test Chamber KOMEG made:
Features 1: Good Quality Guarantee, The main parts we choose France Tecumseh, Germany Bitzer, USA Copeland, Japan Sanyo…
Features 2: 100% QC Check before shipment. There has 2 times check, during manufacture and before shipment.
Features 3: Good Service System. There has a service team with can help the customer via remote assistance via the internet.
Features 4: The test chambers have got the CE, ISO system approval.
Features 5: Accept OEM. ODM Orders. We accept to make your brand /logo on our environmental chambers.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}