CE Marked Thermal Shock Chamber with Separate Hot and Cold Cycling Temperature Zones

• After-sales Service: Support
• Power Supply: 380V AC 50Hz
• Certification: CE, ISO
• Warranty: 12 Months
• Temp. Shock Range: -65ºC~+150ºC
• Cooling Method: Water Cooling
• Model NO.: KTS Series
• High Temp. Chamber Temp. Range: +60ºC~+200ºC
• Low Temp. Chamber Temp. Range: -70ºC~0ºC
• Pre-Heating Time: Within 30 Min
• Pre-Cooling Time: Within 70 Min
• Temperature Uniformity: +/-2ºC
• Temp. Fluctuation: +/-0.5ºC
• Temp. Deviation: +/-2ºC
• Temp. Recovery Time: Within 5 Min
• Controller: 7-Inch LCD Touch Screen
• Compressor: Copeland or German Bitzer
• Transport Package: Standard Exported Fumigation Wooden Case
• Specification: Standard & Customized available
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 903210
• Production Capacity: 1000 Sets / Year

Product Description

CE Marked Thermal Shock Chamber With Separate Hot And Cold Cycling Temperature Zones

Product Overview & Application

Thermal shock test chamber is consists of High-temperature zone (Pre-heating area), Low-temperature zone (Pre-cooling area), and DUTs testing area (thermal shock testing zone). Adopting independent wind path valve switching mode to transfer hot air and cold air to test area; and make sure the high low temperature transferring swiftly, the test sample(DUTs) needn't move during the whole testing process. The test chamber is suitable for materials industry to examine the whole set of products, components, parts, and materials subjected to rapid changes between high and low-temperature conditions; and to evaluate the test samples' performance reliability when suffering the extreme temperature change due to thermal expansion and contraction caused by the changes of chemical or physical damage.

Standard Compliance

GB-2423.1-2008(IEC68-2-1)	Test A: Low Temperature Test
GB-2423.2-2008(IEC68-2-2)	Test B: High Temperature Test
GJBl50.3-2009(MIL-STD-810D)	High Temperature Test
GJBl50.4-2009(MIL-STD-810D)	Low Temperature Test
GJBl50.5-2009	Temperature shock test method

 

Product Parameters

Model		KTS Series(3-Zone)
		100A/B/D	150A/B/D	200A/B/D	252A/B/D	300A/B/D	480A/B/D
Volume(L)		100L	150L	200L	252L	300L	480L
Interior size	W(cm)	50	60	65	70	80	80
	H(cm)	45	50	46	60	46	75
	D(cm)	45	50	67	65	81.5	81.5
Exterior size	W(cm)	151	162	166	190	181	181
	H(cm)	198	215	198	190.5	198	227
	D(cm)	202	230	230	194	233.5	235
Test weight(KG)		5	5	7.5	10	15	20
High Temp.Chamber		+60ºC~+200ºC
Pre-heating time		from normal temperature RT ~ +200ºC, Within 30 min
Low Temp.Chamber		(A)0ºC~ -40ºC         (B)0ºC~ -55ºC         (D)0ºC~-70ºC
Pre-cooling time		from normal temperature RT ~ -70° C Within 70 min
Temp.Shock Range		(A) -40ºC~+150ºC         (B) -55ºC~+150ºC          (D)-65ºC~+150ºC
Temperature uniformity		<=±2.0ºC
Temperature fluctuation		<=±0.5ºC
Temperature deviation		±2.0ºC
Transfer time		<=5s
Recovery time		<=5min
Noise		<=75dB
Interior material		Stainless steel plate(SUS 304)
Exterior material		Baked painting steel or stainless steel(SUS304)
Insulation material		Rigid polyurethane Foam + glass fiber wool
Refrigeration system		Water Cooled
		Semi-hermetic compressor, cascade refrigeration system,Eco-friendly refrigerant
Controller		Panel:7-inch LCD Touch screen, Chinese / English display for option
		Operation model: Program or fix point running
		Memory capacity:120programs,1200steps, all repeat 999cycles, part repeat 99 cycles.
		Accuracy:Temp.:0.1% of F.S±1 digit     Humidity:0.1% of F.S±1 digit
		Input:Temp.:pt-100                Humidity:pt-100 or ~5V DCV
Safety device		NFB(No fuse breaker), over pressure, over heat and over current protection for compressor, over temperature protection,  over load protection for blower, dry heat protection
Standard accessory		Cable port(portΦ50mm)*1, Shelves*2 ,  LED Lighting device *1 , Mobile Casters with foot cups
Ambient Temp.		+5ºC~+35ºC
Power		AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires
Note: 1. We reserve the right to change specifications without prior notice   2. Customized sizes and configurations available

Detailed Photos

Our Process Flow

 

Company Profile

Our Service

Pre-sale Service:

Provide test solution
Send specification and quotation

In-sale Service:

Design
Production
Calibration
Installation
Training
Preventative maintenance

After-sale Service:

24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair

Packaging & Shipping

FAQ

Q:Are your company a trading one or a factory?

A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.

Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.

Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.

Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.

Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our 
production lead time depends on specific items and item quantities. 

Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.

Q:What about the  product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.

Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.