New Product Programmable Cold And Hot thermal shock equipment
Application:
Thermal Shock Test Chamber is used to quickly find the hidden mechanical weaknesses in electronic components when test specimens are exposed to rapid thermal shock condition, and you will not only reduce the premature failures but also increase the reliability of your products when you choose our thermal shock test chamber.
Technical Parameters:
| 3 Zone Thermal Shock Test Chamber |
| Specifications |
Note:
1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available |
| Model |
KTS-B Series |
| 200B |
| Interior size |
W(mm) |
670 |
| H(mm) |
600 |
| D(mm) |
500 |
| Exterior size |
W(mm) |
1720 |
| H(mm) |
2000 |
| D(mm) |
1850 |
| Test weight(KG) |
15 |
| Low Temp. chamber |
-70ºC~-10ºC |
| Pre-heat time |
+20ºC~-70ºC ,Within 60 min |
| Test. chamber |
-55ºC~+150ºC |
| High Temp. chamber |
+60ºC~+200ºC |
| Pre-heat time |
+60ºC~+200ºC ,Within 20 min |
| Recovery time |
High-Temp Exposure 30 min |
| Low-Temp Exposure 30 min |
| Recovery time within 5 min |
| Safety device |
No fuse breaker, over pressure\over heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection |
| Standard accessory |
Cable port(portΦ50mm)*1, shelves*2 |
| Interior material |
Stainless steel plate(SUS 304) |
| Exterior material |
Baked painting steel or stainless steel(SUS304) |
| Insulation material |
Rigid polyurethane Foam+glass fiber wool |
| Refrigeration system |
Water Cooled |
Semi-hermetic compressor, cascade refrigeration system,
CFC free refrigerant(HFC-507 and HFC-23) |
| Controller |
Panel:7-inch LCD Touch panel,Chinese or English display selectable |
| Operation model:Program or fix point running |
| Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles. |
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit |
| Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV |
| Ambient Temp. |
+5ºC~+35ºC |
| Power |
AC 380±10%50Hz ,3 phase 4 wires +Ground Wires |
Main features of Thermal test chamber:
1. Programmable Controller with RS232C, 7 LCD touch panel control
2. Stainess steel Interior, galvanized steel sheet exterior
3. 2pcs stainless steel loading shelves free
4. Multipane viewing window with heater
5. 50mm diameter feed-through port
6. Floor stand with castors.
1.3-zone design: High temperature zone, cold temperature zone, and testing zone.
2. The test specimens under test are stationary in the testing zone.
3. Touch-control operation interface for ease of use.
4. Max. 999H and max. 9999 cycles for high or low temperature shock for thermal shock test chamber.
5. Automatic cycling shock or/and manual selective shock are available
6. Water cooled, binary cooling system for quick cooling effect.
Besides this, we have a lot of other chamber for your reference:
3-zone/ 2-zone Thermal Shock Chamber
Walk-in Constant Temp. And Humidity Chamber
Rapid Temp. Change Chamber
Precise Drying Test Chamber
Temperature/ humidity/ vibration three integrated Chamber
Precise Drying Chamber
Vacuum oven/ no oxidation oven
Air Exchange Type Aging Oven
Burn-in Room
Salt Spray Chamber
Two wings Drop Tester
Vibration Testing Machine( mechanical and electromagnetic)
){kind=link}