Cold Hot Ambient Temp Digital Control 3 Zones Thermal Shock Test Chamber

• Customization: Available
• After-sales Service: Yes
• Power Supply: 380V AC 50Hz
• Model NO.: KTS-300 Series
• Certification: CE, ISO
• Warranty: 1 Year
• Working Chamber: 300 Liters
• Temp. Shock Range: -65ºC~+150ºC
• Cooling Method: Water Cooling
• Testing Size(W* H* D): 800*460*815mm
• Exterior Size(W* H* D): 1810*1980*2335mm
• High Temp. Chamber Temp. Range: +60ºC~+200ºC
• Low Temp. Chamber Temp. Range: -70ºC~0ºC
• Pre-Heating Time: Within 30 Min
• Pre-Cooling Time: Within 70 Min
• Temperature Uniformity: +/-2ºC
• Temp. Fluctuation: +/-0.5ºC
• Temp. Deviation: +/-2ºC
• Temp. Recovery Time: Within 5 Min
• Controller: 7-Inch LCD Touch Screen
• Transport Package: Standard Exported Fumigation Wooden Case
• Specification: Standard & Customized available
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 9032100000
• Production Capacity: 100 Sets /Month
• Package Size: 200.00cm * 300.00cm * 300.00cm
• Package Gross Weight: 2000.000kg

Product Description

 Cold Hot Ambient Temp Digital Control 3 Zones Thermal Shock Test Chamber

Product Overview & Application

3 Zones Thermal shock test chamber  is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment , that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.

Testing box is divided into three parts, one is high-temperature zone, another is low-temperature zone, the testing samples are placed in the center zone, using unique heat storage and cool storage with valve open and close, let the extremely high and low temperature impact the specimen.

It is applicable for electronics, electrical appliance, mobile phones, communication,meters,vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and other products quality inspection.   

Standard Compliance

•GB-2423.1-2008(IEC68-2-1) Test A: Low Temperature Test

•GB-2423.2-2008(IEC68-2-2) Test B: High Temperature Test

•GJBl50.3-2009(MIL-STD-810D) High Temperature Test

•GJBl50.4-2009(MIL-STD-810D) Low Temperature Test

•GJBl50.5-2009 Temperature shock test method

Product Parameters

Model	KTS-300 Series (Chamber volume 300L)
	KTS-300 A	KTS-300 B	KTS-300 D
Testing area size W*H*D(mm)	800*460*815mm
Exterior size W*H*D(mm)	1810*1980*2335mm
Test weight(KG)	15
High Temp.Chamber	+60ºC~+200ºC
Pre-heating time	from normal temperature RT ~ +200ºC, Within 30 min
Low Temp.Chamber	0ºC~ -40ºC	0ºC~ -55ºC	0ºC~-70ºC
Pre-cooling time	from normal temperature RT ~ -70° C Within 70 min
Temp.Shock Range	-40ºC~+150ºC	-55ºC~+150ºC	-65ºC~+150ºC
Temperature uniformity	<=±2.0ºC
Temperature fluctuation	<=±0.5ºC
Temperature deviation	±2.0ºC
Transfer time	<=5s
Recovery time	<=5min
Noise	<=75dB
Interior material	Stainless steel plate(SUS 304)
Exterior material	Baked painting steel or stainless steel(SUS304)
Insulation material	Rigid polyurethane Foam + glass fiber wool
Cooling method	Water Cooled
Refrigeration system	Semi-hermetic compressor, cascade refrigeration system,Eco-friendly refrigerant
Controller	Panel:KOMEG 7-inch Programmable *Operating system: KOMEG KM-5188 Cold-punching system cold output version
Safety device	NFB(No fuse breaker), over pressure, over heat and over current protection for compressor, over temperature protection,  over load protection for blower, dry heat protection,shortage water protector
Standard accessory	Cable port(portΦ50mm)*1, Shelves*2 , Mobile Casters with foot cups*4
Environment Condition	1.Ambient temperature: 5ºC-35ºC 2.Relative humidity: <=85%R.H 3.Atmospheric pressure:80kPa~106kPa 4.Flat, vibration-free ground; 5.Choose good ventilation, no direct sunlight or direct radiation from other heat sources; 6.There is no strong airflow around: when the surrounding air needs to flow, the airflow should not be blown directly onto the cabinet.; 7.No strong electromagnetic field around; 8.No high concentration of dust and corrosive substances around
Power	AC 380±10%  50Hz ,3 phase 4 wires +Ground Wires
Note: 1. We reserve the right to change specifications without prior notice   2. Customized sizes and configurations available

Detailed Photos

 

Our Process Flow

 

Company Profile

Our Service

Pre-sale Service:

Provide test solution
Send specification and quotation

In-sale Service:

Design
Production
Calibration
Installation
Training
Preventative maintenance

After-sale Service:

24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair

Packaging & Shipping

FAQ

Q:Are your company a trading one or a factory?

A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.

Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.

Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.

Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.

Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our 
production lead time depends on specific items and item quantities. 

Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.

Q:What about the  product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.

Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.