ASTM B-117 Standard Chamber Climatic Salt Mist Test Chamber Programmable Salt Spray Test Chamber

• Customization: Available
• After-sales Service: 24 Hours on Line Services
• Warranty: 1 Year
• Model NO.: HL-90-BS
• Interior Dimensions (D*W*H): 1600*500*1000mm
• Exterior Dimensions(D*W*H): 2240*1500*1600mm
• Heater Power: 3kw+0.75kw
• Max. Temp: 35oc or 50oc
• Volume: 60
• Air Compressor: 1/2HP
• Product Name: Salt Spray Test Machine / Spray Nozzle / Salt Spra
• Spray Method: Continuous Spraying
• Transport Package: Strong Plywood Case, Meet International Standards
• Specification: Standard and Customized
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 90321000
• Production Capacity: 1000 Sets Per Yesr
• Package Size: 240.00cm * 170.00cm * 180.00cm
• Package Gross Weight: 250.000kg

Product Description

ASTM B-117 Standard Chamber Climatic Salt Mist Test Chamber Programmable Salt Spray Test Chamber

The Salt Spray Combined Climate Tester is to test: If surface of different material can adopt the corrosion resistance, as well as changes in temperature and humidity after the plating, anodic treatment, spraying, anti-rust oil and other anti-corrosion treatment. This machine is designed to test the influence of salt pollution that might accelerate the corrosion on the metal material outdoors. The device contains the circulation of the sample to the salt fog, dry, hot and humid environment test method.
 

Product name	Salt Spray Combined Climate Tester
Model NO.	KM-F-160C
Volume, Weight and Size(Support OEM)	A.Standard volume: 800L
	B.Internal size: 160*100*50(cm) (L*W*H)
	C.External size: 200*190*140(cm) (L*W*H)
	D.Weight: 550KG
Work noise	≤70db (Measured 1m far from the front and 1.2 high from the ground)
Power	22.5KW
Current	32A
Electronic condition and power requirement	380 volts 50 hz 3 phase
	Allowed fluctuation of voltage: ±10%V
	Allowed fluctuation of frequency:(50±0.5HZ)
	Power supplied by TN-S / TT, resistance of ground fire shall be less than 4Ω
	The user is required to configure the independently controlled and with a appropriate capacity of the air or power switch at installation site.
Temp and humidity range	A.Temp range:25ºC~60ºC
	B.Humidity range:20%~98%RH
Precision control	A. Temp resolution: 0.01ºC ; Humidity resolution: 0.1%R.H
	B. Temp deviation:±1.0ºC; Humidity deviation: ±2%R.H
	C. Temp uniformity: ±2ºC ; Humidity uniformity: ±3%R.H
	D. Temp fluctuation: ±0.5ºC; Humidity fluctuation: ±2%R.H
Heating rate	10ºC→+80ºC≤35 min
Test conditions	A. Room temp: RT~ 80ºC can be adjusted in this range (Salt spray corrosion test: 35ºC±1ºC/50ºC±1ºC )
	B. Temp of pressure bucket: 47ºC±1ºC/63ºC±1ºC
	C. Spray amount: 1.0~2.0 m1/80cm²h ( Average amount of 16-hour collection)
	D. Relative humidity: 20% ~ 98% R.H
	E. Salt concentration: 5% or 5% + Cupric chloride 0.26g (CuCl2 2H2O)
	F. Spray pressure: 1.00±0.01kgf/cm²
	G. PH: 6.5-7.2 Neutral test; 3.0-3.3 Acid test
	H. Installation angle of test board: 15°~30°

Why KOMEG?
1. We specialize in this field for more than 33 years;
2. About this style we have nine different Models, from 108L to 2000L. 
3. We choose fine quality material,such as stainless steel plate, glass wool 
4. Our sales are experienced and trained
5. Big clients, such as, HUAWEI, EPSON, SIEMENS,GREE,etc

Application

Salt water spray test device: This device is used to test the surface treatment of various materials. The so-called treatments include coating, electroplating, films of organic and non-organic materials,anodizing, anti-rest oil and corrosion resistant treatment, which may achieve the purpose of keeping the items from being corroded for a longer period.

Features:
A. The whole part of the device is made of P.V.C. Sheet and the inside of the device is reinforced by using a special lining material. Hence, it is sturdily made and will not transform forever.
B. The test chamber is heated from five directions in order to ensure the temperature difference in
the chamber may be kept within (± 1ºC).
C. Spray nozzle: The nozzle is specially made to enable it to suck up the salt water and then spray it out in the shape of mist with considerable high speed. When it falls on the surface of the item
being tested, the difference of fallen mist may be controlled within ± 0.3ml / 80 cm2h.
D. HUNTER PRINCIPLE is used to make the saturated air hot and moist and to keep the humidity in the test chamber required for test.
E. Temperature is the pre-requisite condition that with have direct impact on corrosion rate. We use P.I.D. temperature control unit to limit the temperature difference within the range of ± 0.5ºC.
F. A warning device is used to indicate the low level of the test fluid, when the fluid is only enough for being sprayed for five hours, a buzzer will remind the user to replenish the liquid to ensure
continuous spray test.
G. Use full automatic detecting system, test stopped automatic, and lighting display when trouble.
H. Customized sizes and configurations are available
 
Standards implemented and met

1 GB/T 2423.17-1993 salt spray test  
2 GB/T 2423.18-2000 salt spray test
3 GB/T 10125-1997 salt spray test
4 ASTM.B117-97 salt spray test
5 JIS H8502  salt spray test
6 IEC68-2-11 salt spray test
7 IEC68-2-52 1996 salt spray test
8 GB.10587-89 salt spray test
9 CNS.4158 salt spray test
10 CNS.4159 CASS Copper accelerated acid salt spray test   
11 GB/T 12967.3-91 CASS Copper accelerated acid salt spray tester

 

Specifications  (Note: We reserve the right to change specifications without prior notice)
Model	HL-160-NS	HL-90-BS	HL-60-SS
Interior dimensions(W*H*D)mm	1600*500*1000	900*500*600	600*400*450
Exterior dimensions(W*H*D)mm	2240*1500*1600	1460*1280*910	1130*1070*630
Volume(L)	800	270	60
Heater	15KW+1KW	7KW+0.75KW	3KW+0.75KW
Air compressor	2HP	1/2HP	1/2HP
Temp. range	35 ºC~ 50 ºC
Power	AC220V 1Φ 50Hz

Established in 1990, Guangdong KOMEG Industrial Co., Ltd has headquartered in Songshan Lake, Dongguan. It is an innovative high-tech enterprise specializing in reliability test technology research and climate environment simulation equipment. We have an experienced and skilled team with nearly 160+ employees. We have three production bases in Guangdong Factory I, Factory II and Jiangsu Factory with 20,000+m² of modern workshops to meet customers' non-standard customized production requirements. We have a series of equipment suitable for various industries including aerospace, transportation, electronic components, energy materials, information communication, medical and chemical industries for customers to choose from. 

KOMEG  specialized in manufacturing a variety of quality inspection instruments, testing equipments and other high-tech products which mainly include: Constant Temperature & Humidity Test Chamber,High & Low Temperature Test Chamber, High & low Temperature Testers with Rapid Temperature Change, Walk-In humidity & temperature test chamber, Cool/Thermal shock test chamber, Salt spray chamber, High temperature aging tester, high and low temperature testing machine , Battery Temperature tester, mechanical vibration tester, Battery burning tester and other quality testing instruments. Thanks to several decades of R&D efforts,the company has established itself as a leading provider of testing instruments of the industry, playing a crucial role in the research and development of high-quality and high-value products within the industry.

FAQ

1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers.  
If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.  

2. What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. 
If you are in urgent need, we can consider making a special arrangement for you.

3. Do you accept customization service? Can I have my logo on the machine? Yes, of course. We can not only offer standard machines, but also customized  machines according to your requirements. And we can also put your logo on the machine.  

4. How to install and use the product?
We will send you operating instructions, English  video by Email. Or you can download on our officail website directly. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use.  And if possible, we can also install your machine at site.