Pressure and Temperature High Low Test Chambers for Altitude Simulation Testing

• Customization: Available
• Power Supply: 380V 50Hz
• Certification: CE
• Model NO.: KU-1000S
• Warranty: 1 Year
• Capacity(Kw): 18
• Chamber Volume(L): 1000
• Inner Size (D*W*H)): 100*100*100(Cm)
• Temperature Range: -70oc~+150oc
• Humidity Constancy: +/-0.5%
• Cooling Rate: 0.7oc~1.0oc/Min
• Pressure Range: Normal Pressure~11.6kpa
• Pressurized Parts: High Quality Steel Plate(Rust Proof&Plastic Spray
• Insulation Material: High Quality Glass Wool
• Heater: Iron-Chrome Wire Heater
• Transport Package: Strong Plywood Case, Meet International Standards
• Specification: Standard and Customized
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 90321000
• Production Capacity: 100-500kg

Product Description

Pressure and Temperature High Low Test Chambers for Altitude Simulation Testing

Altitude Test Chamber - Altitude Test Chamber Manufacturer from China

Altitude test chamber is mainly used to test the environmental adaptability and reliability of test sample under single or simultaneous action of low pressure, high temperature and altitude. At the same time, the electrical performance parameters of the test samples are measured. In addition to military applications, Temperature altitude test chambers are often used to test vehicles in high mountain conditions and to test computers, electronic components and packaging that may require air transportation.

Technical parameter
 

Specifications
Model		KU-504L	KU-1000L	KU-504S	KU-1000S
Inner Size (D*W*H)mm		800*700*900	1000*1000*1000	800*700*900	1000*1000*1000
Capacity ( KW )		11	15	16	18
Chamber Volume ( L )		504	1000	504	1000
Performance	Temp range	-40 ºC~ +150 ºC		-70 ºC~ +150 ºC
	Temp constancy	±0.5 %
	Temp deviation	≥ 100 ºC, ±3.0 ºC( at constant pressure with empty load )
		< 100 ºC, ±2.0 ºC( at constant pressure with empty load )
	Cooling rate	0.7 ºC~ 1.0 ºC /min ( Overall average )
	Pressure range	Constant pressure  ~ 11.6kPa
	Pressure constancy	When  ≥ 40kPa, ±2kPa,     4kPa ~ 40pKa  ±0.5kPa,   when ≤ 4kPa, ±0.1kPa
	Depressurization rate	Constant pressure ~ 1kPa≤30mins ( Normal temp )
	Pressure recovery rate	10kPa/Min(adjustable )
Material	Exterior material	Cold-rolled steel sheet(Rust proof&Plastic Spray treated)/Stainless Steel plate
	Interior material	Stainless steel ( SUS304 )
	Pressurized parts	High quality steel plate(Rust proof & Plastic spray treated)
	Insulation material	High quality glass wool
Cooling System	Compressor	Semi-Hermetic Compressor
	Cooling Mode	Water cooled
Temp regulating method		Balanced Temperature & Humidity Control System  (BTHC )
Pump		Rotary vane type vacuum pump
Heater		Iron-chrome wire heater
Sight window		Circular viewing glass incorporating heat generator
Temp Sensor		Pt-100
Controller		Touch Screen Controller
Safety Devices		Over pressure, over heat and over current protection for compressor, over temp. protection,  over load protection for blower,   Hydraulic and Water lack Protection, leakage protection, phase-lack protection, Pump failure alarm
Standard Accessory		Sight window, Cable Port( 1 located on the left side), Baffle, Baffle frame*2
Power		AC380V/50Hz, 3Phase 5 wires+ Ground Wire.
Note:  1. We reserve the right to change specifications without prior notice   2. Customized sizes and configurations available

 

Temperature and altitude check controller, 7 inch true color LCD touch screen. Programmable microcomputer PID control SSR output operation.	Controller System
The controller operation interface is available in English, and the real-time operation curve can be displayed on the screen.
Control mode: heat balance temperature and humidity control mode, using P·I·D+S·S·R system with channel coordination control; With the function of automatic calculation, the temp and humidity changing conditions can be corrected immediately, making the temperature & humidity control more accurate and stable.
Temperature altitude test chamber has the capacity of 120 programs, 99 segments per group and 999 steps per cycle, and the maximum value of each period is 99 hours and 59 minutes.
U disk can be inserted at any time to export or upload data, and can be presented with software in the computer to view or into Excel format.
The meter is equipped with USB port, which can be directly driven by the port to preview and print micro printer.
The temperature altitude device has a powerful network monitoring, control network functions, even if you are not next to the machine, you can also operate on the computer, real-time monitoring. Be familiar with the operation of the altitude test chamber.
The controller panel is equipped with a 10M/100M Ethernet interface, which can automatically obtain the IP address for remote control. It can support real-time monitoring, history curve playback, program editing, FTP upload and download, history failure view, remote fixed value/program control and other functions.
Auxiliary Functions: Fault alarm and reason, Processing prompt function; Power off protection function; Upper and lower limit temperature protection function; Calendar timing function (automatic start and automatic stop), Self-diagnostic function.