High & Low Temperature Altitude Test Chamber

• Customization: Available
• After-sales Service: 24 Hours on Line Services
• Power Supply: AC380V 50Hz, 3 Phases
• Model NO.: KU-504S
• Certification: CE, ISO
• Warranty: 1 Year
• Capacity: 16kw
• Chamber Volume: 504L
• Inner Size: W800*H700*D900mm
• Outer Size: W1000*H1835*D1760mm
• Pressure Range: Normal Pressure~ 1.0kpa
• Temperature Range: -70~150c
• Heating and Cooling Rate: Average 1.5c/Min
• Pressure Time: Normal Pressure ~ 133PA, About 30min
• Transport Package: Strong Plywood Case, Meet International Standard
• Specification: Standard and Customized
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 90321000
• Production Capacity: 1000 Sets Per Yesr

Product Description

 

 High & Low Temperature Altitude Test Chamber

• The low-pressure test chamber can perform low-pressure tests independently, and can also perform comprehensive tests with factors such as high temperature, low temperature and humidity.

• It is used to test the adaptability of the product when it is subjected to height, temperature, humidity, and combined effects in the air or in high altitude areas.

Application industry

It is suitable for high and low temperature and low pressure tests of aerospace products, information electronic instruments, electrical, electronic products, machinery and other products, parts, materials, etc., and simulates temperature changes and altitude changes under single or combined conditions for products, zero Quality and reliability testing of components, materials, etc., for product design, improvement, identification and factory inspection.


 

Model		KU-504S
Inner Size (D*W*H)mm		800D*700W*900H
Capacity(KW)		16
Chamber Volume(L)		504
Performance	Temp range	-70ºC~+150ºC,-158ºF~+302ºF
	Temp constancy	±0.5%
	Temp deviation	≥100ºC, ±3.0ºC(at constant pressure with empty load)
		<100ºC, ±2.0ºC(at constant pressure with empty load)
	Cooling rate	0.7ºC~1.0ºC/min(Overall average)
	Pressure range	Constant pressure ~1kPa
	Pressure constancy	When ≥40kPa, ±2kPa,     4kPa~40pKa  ±0.5kPa,   when≤4kPa, ±0.1kPa
	Depressurization rate	Constant pressure~1kPa≤30mins(Normal temp)
	Pressure recovery rate	10kPa/Min(adjustable)
Material	Exterior material	Cold-rolled steel sheet(Rust proof&Plastic Spray treated)/Stainless Steel plate
	Interior material	Stainless steel(SUS304)
	Pressurized parts	High quality steel plate(Rust proof & Plastic spray treated)
	Insulation material	High quality glass wool
Cooling System	Compressor	Semi-Hermetic Compressor
	Cooling Mode	Water cooled
Temp regulating method		Balanced Temperature & Humidity Control System(BTHC)
Pump		Rotary vane type vacuum pump
Heater		Iron-chrome wire heater
Sight window		Circular viewing glass incorporating heat generator
Temp Sensor		Pt-100
Controller		Touch Screen Controller
Safety Devices		Over pressure, over heat and over current protection for compressor, over temp. protection, over load protection for blower,Hydraulic and Water lack Protection, leakage protection, phase-lack protection, Pump failure alarm
Standard Accessory		Sight window, Cable Port( 1 located on the left side), Baffle, Baffle frame*2
Power		AC380V/50Hz, 3Phase 5 wires+ Ground Wire.
Note: 1. We reserve the right to change specifications without prior notice                                                                                                 2. Customized sizes and configurations available

Our Service

You will get 12 months free components warranty. If any components fail, we will send you the new ones for replacement and guide your engineers for maintenance by email or video meeting. If the above steps can't solve the problem, we can ask our local distributors to repair it at your company and you just need to pay the labour cost. Or you can order from our distributors, you will get the maintenance services directly from our distributors.