IEC61215/UL1703 PV Modules Climatic Aging Testing/Dh Cl Hf Test Chamber

• Customization: Available
• After-sales Service: 24 Hours on Line Services
• Power Supply: 380V /220V
• Model NO.: KWH-27LF3.4W0
• Certification: CE, ISO
• Warranty: 1 Year
• Temp. Range: -40 Oc~+85 Oc
• Humidity Range: 20%~95%R.H.
• Interrior Dimension(W*H*D): 3000*2600*3400mm
• Volume(M3): 27cbm
• Exterior Dimensions(W*H*D): 3200*2900*4130mm
• Heat up Time: -40oc~+85oc Within 40mins
• Pull Down Time: +85 Oc~-40 Oc Within 40mins
• Insulation Material: Glass Wool+Rigid Polyurethane
• Refrigeration System: Copeland/Tecumseh Compressor(Imported)
• Double Door: W(1500+1500) X H2600mm
• Transport Package: Strong Plywood Case
• Specification: Standard and Customized
• Trademark: KOMEG
• Origin: Guangdong, China
• HS Code: 90321000
• Production Capacity: 1000 Sets Per Yesr
• Package Size: 400.00cm * 400.00cm * 400.00cm
• Package Gross Weight: 1000.000kg

Product Description

IEC61215/UL1703 PV Modules Climatic Aging Testing/DH CL HF Test Chamber

KOMEG Walk-In Chamber are mainly used in cell and module ,EVA, aging test, solar power plants site test, solar power plant power generation improvement, etc.. Photovoltaic product aging test products meet international standards such as IEC61215, IEC61730, IEC61701, IEC62804, IEC61853, IEC62979, UL1703; We research and development multi pv product testing machine, like : PV module hail impact tester, PV module breakage tester, UV p-reconditioning tester, humidity-freeze. Thermal cycling testing machine, Salt -spray tester, wet leakage current tester, etc. 
 

IEC61215/UL1703 PV modules climatic aging test/DH CL HF test chamber 

1. Brief Introduction for PV Modules test standards:
The designed usage time for solar cell module is about 20~30years , and the reliability test is the simulation of the earth's surface photovoltaic modules (crystalline silicon and amorphous silicon thin film, concentrating) design verification, can let the module long-term operating more than 20 years in a general climate , specification requires that solar cells module do test below :

Reference Standard
IEC61215	GB9535	IEC61646	GB18911	UL1703	IEC62108

Thermal cycle test;
Humidity-freeze test;
Damp Heat;

Meet the Damp heat(DH) requirement specified in 4.13 clause of IEC 61215-2016 standard & MST53 clause of & IEC61730-2016 standard. Meet the Thermal cycling test(TC) requirements specified in the 4.11 clause of IEC 61215-2016 standard & MST51 clause of & IEC61730-2016 standard & 35 clause in UL1703 standard. Meet the Humidity-freeze test(HF) requirements in the clause 4.12 of the IEC61215-2016 standard & MST52 clause of IEC61730-2016 & 36 clause in UL1703 standard

2. Other standard comply: 


GB/T 2423.1-2001 Test A:Low Temp Test

GB/T 2423.2-2001 Test B:High Temp.Test

GJB 150.3-1986   High Temp.Test

GJB 150.4-1986   Low Temp Test

IEC68-2-1 Test A:Cold

IEC68-2-2 Test B:Dry Heat

GB 11158High Temp. Chamber Test Condition

GB10586-1Humidity thermal test chamber technology

GB/T 2423.2 High Temp. Test Condition

GB/T 2423.3 High Temp. Test Condition

IEC 61215 PV module international test standard

IEC 61646 PV module international test standard

UL1703
 
3.  Environmental Walk-In Chamber Main Technical Parameters

Model			KWH-27LF3.4W0
Volume(m³)			27CBM
Interior Dimensions			W3000 x H2600 x D3400mm
Exterior Dimensions			W3200 x H2900 x D4313mm
Safety Devices(standard)			No fuse breaker, overpressure, overheat and over current protection for compressor, over-temperature protection, overload protection for the blower, dry heat protection
Standard accessories			Sight window*1, cable port ( portΦ50mm ) *1, chamber lamp*1, status indicator
Control System			Balanced Temperature & Humidity Control System
Refrigeration system			Water Cooled
			Semi-hermetic compressor, cascade refrigeration system,
			CFC free refrigerant ( R404A and R23 )
Controller		Panel	7-inch LCD Touch panel, Chinese or English display selectable
		Operation model	Program or fixpoint running
		Memory capacity	100 programs,100steps, all repeat 999 cycles, part repeat 99 cycles
		Accuracy	Temp.:0.1% of F.S ± 1 digit Humidity:0.1% of F.S ± 1 digit
		Input	Temp.: pt-100, Humidity: pt-100 or ~5V DCV
		Comm.port	RS-232 or RS-485 ( Softawre is an option)
Temp. range			Maximum: 85 ºC,120 ºC; Minimum: -60 ºC, -50 ºC, -40 ºC, -30 ºC, -20 ºC, -10 ºC, 0 ºC
Humidity Range			10%, 20%, 30% ~ 95%
Temp. constancy			±0.5 ºC
Humidity constancy			±2.5%R.H
Temp. uniformity			±2.0 ºC
Humidity uniformity			±5.0%R.H
Ambient Temp.			+5 ºC~+35 ºC
Wiring method			AC 380 ± 10% 50Hz ,3 phase 4 wires + Ground Wires
Heat uptime			+20 ºC~+80 ºC, Within 60 min
Pull downtime			+20 ºC ~ -55 º, -40 ºC, -20 ºC, -10 ºC, Within 120 or 90 or 60 min
Interior material			Stainless Steel Plate(SUS 304)
Exterior material			Baked Painting Steel Or Stainless steel ( SUS304)
Insulation material			Rigid polyurethane foam
Door size (mm)			Single wing: W1500 x H2600; Double wing: W3000 x H2600;
Note: 1. We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available

4. Current moitoring system introduction  

Current continuity test system is the company specialized for IEC61215 standard MQT11 high and low temperature cycle experiment clause, MQT12 wet and frozen experiment clause.  The netcol5000-C provides stable DC, current recording, temperature recording, and temperature control functions. The NETCOL5000-C uses temperature control to start the DC power supply, and monitors the multi-channel current and multi-channel temperature in real time for a long time.  Used together with high and low temperature circulating box, it can monitor the internal circuit connectivity of multiple components.  To judge the fatigue resistance of solar cell modules, the rationality of laminating process and the stability of welding quality under the alternating environment of high and low temperature.
 

About Us

KOMEG is always dedicated to Climatic test chambers Maintenance equipment and manufactuer. 
With innovative development ideas, we create perfect products to meet the market demand, and establish new business models to expand overseas market. Our products are widely exported to Europe, America, Southeast Asia and the Middle East, and are well accepted by new and regular clients.
 
Persisting in the spirit of "Sincerity first, Quality oriented and Good faith", we insist on the best quality for survival and the good reputation for development. Sticking to "Customers Full Satisfaction", we keep working professionally, diligently and innovatively, and serving considerately to win customers' constant trust and support.

Our Service

Pre-sale Service:

Provide test solution
Send specification and quotation

In-sale Service:

Design
Production
Calibration
Installation
Training
Preventative maintenance

After-sale Service:

24-hour Online contact
Free software upgrades
Replacement parts
Assistance via phone or internet
On-site diagnosis and repair/online diagnosis and repair

Packaging & Shipping

FAQ

Q:Are your company a trading one or a factory?
A:Factory + trade (integration).More than 30 years focusing on environmental test instruments field.

Q:Which certifications do you have ?
A:We have passed the CE certification,the ISO certification ,China high-tech enterprise certificate,etc.

Q:How to choose the most suitable products?
A:Our professional team will give you the best suggestion, when you need some products to make the test, just be patient to tell us the information about your test sample, the parameters you required. Our team may help you find the best one.

Q:Does your product can be customized with my requirement?
A:Yes, of course. We have independent R&D capability with structure engineer, electrical system engineer and cooling system engineer, which enable us to keep flexibility on customer's requirements, including product size, temperature range, product color, etc.

Q:After an order is placed, when to deliver?
A:Generally about 25-30 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our 
production lead time depends on specific items and item quantities. 

Q:How is the product delivered?
A:Usually, sea transportation is our first suggestion for customers because its cost is less. But if customers need to ship the product by air or by rail, we can also help them.

Q:What about the  product' services and quality?
A:Each instrument must be carried out 100% quality examination and test when shipping and delivering goods. We provide a very specific operation manual. Usually, we will take a video to show how to operate as well. If customers need, we can also arrange for abroad onsite installation and training.

Q:What about the warranty with after - sale services?
A:We provide free parts replacement service for accessories with one year. We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sale service.