Small Size Two Zones Thermal Impact Testing Equipment Thermal Shock Chamber Manufacturer

• Customization: Available
• After-sales Service: 24 Hours on Line Services
• Power Supply: 380V
• Model NO.: TST-64A
• Warranty: 1 Year
• Test Weight(Kg): 5kg
• Interrior Dimension(W*H*D): 410*560*410mm
• Basket Dimension (W*H*D): 300*300*300mm
• Low Temp. Chamber: -55 Oc~-10 Oc
• Pre-Cold Time: +20 Oc~-50 Oc Within 60mins
• Test Chamber: -40 Oc~+150 Oc
• Institutional Transfer Time: Within 10seconds
• Recovery Time(High Temp.): Exposure 30mins
• Recovery Time(Low Temp.): Exposure 30mins
• Recovery Time: Within 5mins
• Transport Package: Strong Plywood Case, Meet International Standard
• Specification: Standard and Customized
• Trademark: KOMEG
• Origin: Dongguan China
• HS Code: 90321000
• Production Capacity: 1000 Sets/Year
• Package Size: 220.00cm * 123.00cm * 222.00cm
• Package Gross Weight: 1000.000kg

Product Description

Two Zones Thermal Impact Testing Equipment Thermal Shock Chamber
 

Product Description

 

The product is suitable for electronic elements' safety test, and provides a reliability test, at the same time, this equipment test, can improve the reliability of products and product quality control.

Three of the test chamber configurations include:

A Vertical Orientation Thermal Shock Chamber has two independently controlled hot and cold zones; one atop the other. A single product carrier moves between each zone, subjecting the product to dramatic changes in temperature. An advantage of the Vertical Orientation chamber is it uses less floor space, making it ideal for smaller labs.

A Horizontal Orientation Thermal Shock Chambers has three side-by-side independent zones: hot, ambient, and cold. The addition of the ambient zone allows for three-zone testing, which is a requirement of some strict standards. This unique and versatile chamber configuration can also be used for two-zone tests. This is accomplished by programming the product carrier to automatically transfer the product from hot to cold, and back again, eliminating a dwell in the ambient zone.

A Double Duty Thermal Shock Chamber has a cold zone positioned between two hot zones, aligned vertically on top and bottom. Products under test are placed in one of two product carriers and transferred between the zones producing severe thermal stress. At least one product carrier always occupies the cold zone. This design makes efficient use of the chamber cooling system, providing increased product testing throughput over standard thermal shock designs. Heaters are incorporated into the cold zone for defrost, allowing the zone to be operated as a temperature cycling chamber when it is not being used for thermal shock tests.

Product Parameters

 

Two-Zone Thermal Shock Chamber
Specifications		Note: 1. We reserve the right to change specifications without prior notice                 2. Customized sizes and configurations available
Model			TST-D Series
			70D	130D	226D	360D	500D
Test weight (KG)			5	5	5	5	10
Interior size		W(mm)	410	520	610	710	810
		H(mm)	560	670	770	830	710
		D(mm)	410	520	610	770	860
Basket   size		W(mm)	300	410	510	610	710
		H(mm)	300	410	510	730	610
		D(mm)	300	410	510	510	730
High Temp. Chamber			+60ºC~+200ºC
Low Temp. Chamber			-80ºC~-10ºC
Pre-heat time			+60ºC~+200ºC,Within 25 min
Pre-cold time			+20 ºC ~ -70ºC,Within 60 min
Test. chamber			-65ºC ~ +150ºC
Recovery time			High-Temp Exposure 30 mins
			Low-Temp Exposure 30 mins
			Recovery time within 5 mins
Institutional Transfer time			within 10 seconds
Interior material			Stainless steel plate(SUS 304)
Exterior material			Baked painting steel or stainless steel(SUS304)
Insulation material			Rigid polyurethane Foam+glass fiber wool
Refrigeration system			Water Cooled
			Semi-hermetic compressor, cascade  refrigeration system, CFC-free refrigerant ( HFC-507 and HFC-23 )
Controller			Panel:7-inch LED Touch panel, Chinese or English display selectable
			Operation model: Program or fix point running
			Memory capacity:120programs, 1200 steps, all repeat 999 cycles, part repeat 99 cycles.
			Accuracy:Temp.:0.1% of F.S±1 digit     Humidity:0.1% of F.S±1 digit
			Input:Temp.:pt-100,Humidity:pt-100 or  ~ 5V DCV
Safety device			No fuse breaker, overpressure, overheating and over current protection for compressor,
			over temperature protection, overload protection for the blower, dry heat protection
Standard accessory			Cable port(portΦ50mm)*1,   shelves*2,
Ambient Temp.			+5 ºC ~ +35ºC
Power			AC 380±10 %  50Hz ,3 phase 4 wires +Ground Wires