• Temperature and Humidity Chambers for Electronics, Plastic, University Research
  • Temperature and Humidity Chambers for Electronics, Plastic, University Research
  • Temperature and Humidity Chambers for Electronics, Plastic, University Research
  • Temperature and Humidity Chambers for Electronics, Plastic, University Research
  • Temperature and Humidity Chambers for Electronics, Plastic, University Research
  • Temperature and Humidity Chambers for Electronics, Plastic, University Research

Temperature and Humidity Chambers for Electronics, Plastic, University Research

Power Supply: 380/220V
Certification: CE, ISO
Warranty: 1 Year
Usage: Temperature and Humidity Test Chamber
Cooling Mode: Air Cooled
Temperature Range: -20c~ 150c
Customization:

Contact Supplier

Diamond Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
KMT-225R
Dew-Point Temperature
+10c ~+95c
Heating Rate
3.0ºC/Min
Cooling Rate
1.0ºC/Min
Humidity Range
20%~98% R.H.
Controller
Touch Screen Programmable Controller
Inner Size
W 700 mm*H700 mm*D 480 mm
Outer Size
W 900 mm*H 1660 mm*D 1320 mm
Transport Package
Standard Wooden Case
Specification
225L
Trademark
KOMEG
Origin
China Mainland
HS Code
90321000
Production Capacity
1000 Sets/ Year

Product Description


Temperature and Humidity Chambers for Electronics, Plastic, University research

KOMEG Environmental Control Products provide the measurement and precise control of temperature and humidity in enclosed environments required for electrostatics, electronics, petrochemical, packaging, pharmaceutical, plastic, biomedical, university research, and similar applications.

We offer standard chambers and custom enclosures, as well as controllers and operating systems for use with existing enclosures.

Benefits more than you can get from other supplier:

1) Delicate touch and excellent user experience
2) Unique and compact design, top grade appearance, stable performance and easy operation.
3) Can simulate a wide range of temperature and humidity environments
4) Capable of testing large components, assemblies, and finished products
5) Customized sizes and configurations available
6) 1 year warranties


 2. Volume and size
2.1  Volume About 225L
2.2  Inner size W 700 mm*H 700 mm*D 480 mm
2.3  Outer size W 900 mm*H 1660 mm*D 1320 mm((Not including the protruding part))
Tips: For external dimensions, please confirm the three views according to the final design!
2.4  Floor area About  1.19m2;(Confirm after signing the contract)
3. The main technical parameters
3.1  Test Conditions Equipment cooling method: air-cooled
Measured at room temperature +25 ° C under no load, Temperature and humidity performance measurement comply with related regulation of IEC60068-3-5 standard; Sensors placed in the air outlet.
3.2  Temp. range -20ºC~+150ºC
3.3  Temp Constancy ±0.5ºC
3.4  Temp Uniformity <=2.0ºC
3.5  Temp Deviation <=±2.0ºC
3.6 Heating and cooling rate Heating rate:
 -20ºC~+100ºC, full range average  About 35min  no load
  Cooling rate:
 +20ºC~-20ºC, full range average  About 40min  No load
3.7 Load situation without
3.8 Noise <=75 (dB) (The noise detection device is measured 1m away from the door of the device)
3.9 Meet the test standard GB-2423.1-2008(IEC68-2-1) Test A: Low Temperature Test
GB-2423.2-2008(IEC68-2-2) Test B: High Temperature Test
GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
GJBl50.3-2009(MIL-STD-810D) High Temperature Test
GJBl50.4-2009(MIL-STD-810D) Low Temperature Test
4. Chamber Structure
4.1  Structural features Overall chamber structure
The test chamber was composed of three parts as below:
Insulation box, separate refrigeration units, and electrical control cabinet.
4.2  Thermal insulation structure Outer spray plastic anti-corrosion electrolysis plate - intermediate insulation layer is temperature resistant foam insulation material - inner chamber SUS304 stainless steel plate
4.3  Outer chamber material High-quality anti-corrosion electrolytic board, surface electrostatic powder baking paint, color is KOMEG standard color
4.4  Inner chamber material SUS304 stainless steel plate, thickness = 1.0 mm; the inner liner is fully welded.
 
4.5  Insulation Hard polyurethane foam insulation layer, thickness = 100mm, flame retardant grade B2
4.6  Door
    
Single door, open on the left, explosion-proof handle, heating wire was installed at the door frames to prevent condensation at low temperatures.
Two explosion-proof chains are added on both sides of the door, and the chain is longer. When the door is blasted, the door can be opened a little. The internal air pressure is quickly released, but it cannot be ejected.

4.7  Observation window

4.8 Explosion-proof pressure relief port
Install multi-layer hollow observation window on the door, size: W 380×H 500mm, stainless steel protection net inside the glass to prevent the glass from scattering when it is exploded (cannot guarantee absolute safety).

Mechanical explosion-proof pressure relief port, when the pressure exceeds the set value, the explosion-proof door automatically opens to remove the pressure inside the chamber, which can prevent damage to the equipment
4.9  Control panel Temperature (wet) control touch screen display, start switch, emergency stop switch, buzzer
4.10  Unit part include:Refrigeration unit, drain pipe, cooling fan, power distribution control cabinet; Humidification and hydration waterway control system
4.11  Distribution Cabinet Switchboard ; Cooling fan
Total power leakage circuit breaker
4.12  Standard configuration Lead hole: diameter φ50mm 2 with silicone plug on both sides (confirm after contract signing),
Sample holder: 2 layers of drawer type stainless steel sample holder, bearing 30KG/layer
Window light: 1 type (DC 24V LED light) (installed on the window, the switch is set on the external PLC touch screen, and has a delay automatic shutdown function); Moving casters (with foot cups) 4
 
Temperature and Humidity Chambers for Electronics, Plastic, University Research
Temperature and Humidity Chambers for Electronics, Plastic, University Research Temperature and Humidity Chambers for Electronics, Plastic, University Research
Temperature and Humidity Chambers for Electronics, Plastic, University Research
Our climatic chambers are designed for at least 10 years operation without any big problems.

To get it, we have done:

1. Use high quality and well known components from Tecumseh, Copeland, Bitzer, Danfoss, Omron, Schneider, Gavazzi, etc
2. Excellent craftmanship, such as clear labels on each wires, laser cutting metal work, etc
3. Advance technology, such as 30% energy saving CFD technology(computational fluid dynamics) and copper tube bending technology

Pre-sales service

1) More than 30 years manufacturer experience and 8 years export experience.
2) Acceptable customization for all kinds of special specification products.
3) We value very inquiry sent to us, ensure quick and competitive offer.
4) We put your order into our tight production schedule,ensure your punctual delivery time.
5) We are a sales team, with more than 4 years experience, more professional and reliable.
6) Welcome to visit our factory or have video call with us in any time .

After-sales service

1) We deal with your complains within 24 hours.
2) Training how to install the machine, training how to use the machine.
3) Engineers available to service machinery overseas.
4) All staffs in our company with philosophy of " integrity, dedication, truth-seeking, enterprise", would be
dedicated to provide high quality service and products for you.

Send your message to this supplier

*From:
*To:
avatar Mr. Peter Zhang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now