High Performance Rapid Temp. Change Chamber with Tecumseh Compressor

• After-sales Service: 24 Hours on Line Services
• Warranty: 1 Year
• Type: Climate Chamber
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Display: Digital
• Model NO.: ESS-225LL5-G
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC380V
• Working Chamber Volume (L): 225L
• Temp. Rate of Change Oc/Min: 3-15
• Ramp Temp. Range: -70oc~+100oc(Rapid Temp. Change -40oc~+85ocfull Li
• Temp. Constancy: +/-3.0oc
• Colling Mode: Water Cooled
• Heater: Iron-Chrome Wire Heater
• Compressor: France Imported Tecumseh Semi-Hermetic Compressor
• Blower: Centerifugal Blower
• Power: AC380+/-10% 50Hz 3phase4wires+Groud Wires
• Standard Accessories: Sight Window, Cable Port, Baffle, Baffle Frame*2,
• Transport Package: Strong Plywood Case, Meet International Standard
• Specification: Standard and Customized
• Trademark: KOMEG
• Origin: Dongguan, China
• HS Code: 90321000
• Production Capacity: 1000 Sets/Year

Product Description

High Performance Rapid Temp. Change Chamber with Tecumseh Compressor

Benifits more than you can get from other supplier
1. Dedicatetouch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide rang of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties
Welcome to KOMEG virtual office!

Applications
Temperature adaptability test under the condition of rapid change, or gradient for electrical, electronic, instruments and other products or spareparts, particularly applies to environmental stress screening test(ESS)

Feature:
1) Temp Range: -55º C~150º C
2) Inside size: 700*700*480mm(W*H*D),
Outside size; Around 980*1900*1800mm
3) Temperature change rate: 3º C~15º C/min
4) Dell time: 30min
5)Static load weight: Less than 30KG.
6) Precooling time: RT~-70º C: 80min
7) Temperature stability: ± 0.5º C
8)Fluctuation for ramp up/down: ± 3.0º C(with empty load)
9) Temperature uniformity: ± 2.0º C (with empty load)
10) Noise: Less than 72dB

Standards:
GB10592-89 Technical requirements for high and low temperature test chamber
GB2423.1-1989 Low temperature test
GB2423.2-1989 High temperature test mode

The following is Technical parameters:

Specifications
Model	ESS-SL
	225SL5	225SL10	408SL5	408SL10	1000SL5	1000SL10	1000SL15
Working Chamber Volume(L)	225		408		1000
Temp Rate of Change( ºC/Min)	5	10	5	10	5	10	15
Performance	-70ºC~+100ºC
	Rapid Temp Change -55ºC~+85ºC Full Linear Control
Humidity Constancy	±0.5ºC
Temp Constancy	±3.0ºC
Exterior Material	Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel
Interior Material	Stainless Steel Plate(SUS 304)
Insulation Material	Rigid Polyurethane Foam
Safety Devices	over pressure,over heat and over current protection for compressor, over temp. protection,
Compressor	Semi-Hermetic Compressor
Cooling Mode	Water Cooled
Control system	Balanced Temperature & Humidity Control System(BTC type)
Heater	Iron-chrome wire heater
Blower	Centrifugal Blower
Observation Window	Glass incorporating heat generator
Temp Sensor	Pt-100
Controller	Touch screen programmable controller
Ambient Temp.	+5ºC~+35ºC
Power	AC 380V/50Hz 3phase 5 wires+ Ground wire
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available

Specifications
Model	ESS-LL
	225LL5	225LL10	408LL5	408LL10	1000LL5	1000LL10
Working Chamber Volume(L)	225		408		1000
Temp Rate of Change( ºC/Min)	5	10	5	10	5	10
Performance	-70ºC~+100ºC
	Rapid Temp Change -40ºC~+85ºC Full Linear Control
Humidity Constancy	±0.5ºC
Temp Constancy	±3.0ºC
Exterior Material	Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel
Interior Material	Stainless Steel Plate(SUS 304)
Insulation Material	Rigid Polyurethane Foam
Safety Devices	over pressure,over heat and over current protection for compressor, over temp. protection,
Compressor	Semi-Hermetic Compressor
Cooling Mode	Water Cooled
Control system	Balanced Temperature & Humidity Control System(BTC type)
Heater	Iron-chrome wire heater
Blower	Centrifugal Blower
Observation Window	Glass incorporating heat generator
Temp Sensor	Pt-100
Controller	Touch screen programmable controller
Ambient Temp.	+5ºC~+35ºC
Power	AC 380V/50Hz 3phase 5 wires+ Ground wire
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available

Who We Are / Manufacturer of standard and custom environmental test chambers

Since our foundation in 1990, GUANGDONG KOMEG INDUSTRIAL CO., LTD has been a leading engineering technology company, specialized in the design, manufacture, supply and service of environmental test chambers, which is used to simulate real environmental conditions such as temperature, humidity, pressure, vibration, rain, dust, etc. 

Located in Songshan Lake, Dongguan, China, covering an area of 12,000+ square meters, with more than 32 years of experience, expertise and our 130+ well trained staff , we are dedicated to provide the energy-saving and practical solutions to our clients from many different industries including electronics, automotive, renewable energy, testing laboratory, semiconductor, telecommunications, to name a few.

KOMEG offer a wide range of standard and customized environmental test chambers from small bench top sizes to large walk in rooms. 

Our main product  includes:temperature humidity test chambers, environmental stress screening sest shambers (ESS), walk-in environmental chambers, battery test chambers, thermal shock chambers, HAST chambers, altitude test chambers, industrial ovens, agree (vibration test) chambers, salt spray test chambers, and more.
 
We're proud to have ISO9001:2015 and ISO14001:2015 certified, all our products are designed to meet different international testing standards like ASTM, DIN, ISO, IEC, etc.